Jump to content


Pedigreed Bulldog
  • Content Count

  • Joined

  • Last visited

Everything posted by MACKS

  1. Need a new drivers seat for my 96 Mack CL,have had a high back (the original seat hat came with the truck) but I think a low back would suit me just fine,ether way any recommendations for a decent seat,should I buy on line or r just see what my Mack dealer has?
  2. I thought the ch had a set forward axle That one looks like a set back like a cl?
  3. Does anyone have the part number for this switch,maybe I can source one one line instead of Mack and there crazy prices?
  4. Damn you beat me out with that one..lol
  5. Do you guys like seat belts,I don't..🤔😇
  6. MACKS

    RIP Dozer

    Sorry for your loss,I've been down that road a few times,it's not easy but the pain passes with time,good luck and do get another dog..
  7. I have an aluminum bed,the floor is gonna need attention,do all shoot work thinking the asphalt will slide out better,to often I have to raise the bed to high to my likening to get it to flow out the shoots.
  8. Any of you dump truckers that haul asphalt using a bed liner,what make,how to install and how do the work?
  9. There's no way the manufacturer gvwr on that truck is 80,000 lbs..
  10. You can't gross any more than your tires are rated for,also he talking about air ride...
  11. It's a 96,would it have one?
  12. My tachometer is whacked out,any one know where the sensor is located?
  13. Haha,that's a little to far from Long Island NY..lol
  14. Are you saying it's slipping on the splined shaft that comes out of the top of the steering box?
  15. Starting about ten years ago Kenworth was all the rage,in my opinion it was all about driver comfort and nothing else,now Mack makes a comparable cab as far as comfort goes and they seam to making a huge comeback around here n NY,most of the dump truck companies are buying Mack again,take a close look at ten or twelve year old Mack vs Kenworth,that should help u decide,my 23year old Mack cl factory dump still looks and drives amazin,I worked almost every day this year and not one break down that put it out of service try that with a kenworth new or old,not gonna happen..
  16. I've used roof flashing inside the cab,way cheaper than dynamat and the same effect,you can double layer it if you want,hit it with a heat gun or hair dryer,excellent sound deadening with no odors..
  17. I don't know about new trucks but was told by a very good mechanic the older engines will run 90 degrees above ambient temperature.
  18. I'd like to run it loaded down the LIE past 66 (dot) ..lol
  19. Lol,I don't mean the whole rail just along the top and bottom where the salt and moisture gets in between them,was thinking that would seal them up better than paint or undercoating..
  20. I didn't know they cost that much,shop that works on my truck said he could replace my rails for ten thousand installed,to late to take mine apart,23 years in NY and plowing snow takes its toll..
  • Create New...