terry
-
Posts
2,397 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by terry
-
1969 Mack R611T official thread
terry replied to Robo987's topic in Antique and Classic Mack Trucks General Discussion
Yeah the three filters is for the ESI engines, I have to guess somebody put the ESI filter stand on the engine🤷♀️. Terry -
Joey has it pegged! terry
-
Yeah there out there, just have to do a little digging. terry
-
If you only have the one fuel filter, should be an arrow on top for fuel direction, intake is from the tank, discharge side goes to bottom of lift pump on side of engine. Terry
-
Happy birthday bud! you have been a wealth of info. on here! terry
-
Might get more interest with a few more pics and price. terry
-
So they don't have fire ring head gasket for the 20 bolt gasket?
-
Does it have the fire ring liners?
-
Does your liners have the ridges for fire rings? and are the heads scored for the rings? terry
-
I believe the biggest problem of putting turbos on the early engines was head gasket leaks, no fire rings. terry
-
38K Camel back leafs fanning out
terry replied to Bill 88 R 688 ST's topic in Driveline and Suspension
Bet a lot of guys don’t know what your twinkie comment is!😂 terry -
That taper leaf rear suspension is not very good, real soft, looks like a lot of rust jacking around the fifth wheel. Terry
-
I once owned a B421 , had that flathead mack gas engine, thy were either a 401 or 402 engine. terry
-
No just the cost of all them "proper" tools!🤣
-
Wow!! Terry
-
Vintage Mack Power
terry replied to h67st's topic in Antique and Classic Mack Trucks General Discussion
That’s an older one, rockwell front axle and real early air cleaner set up. Terry sure a nice one for that early! -
Looking for a drag link bar for first series superliner
terry replied to Superlinergirl's question in Mack Truck Q & A
looks like that welded together tie rod needs replaced too! terry -
Isn't that annoying have people look over your shoulder while your working? terry
-
Probably have a cylinder leaking, letting air leak out the shifter. Terry
-
Same frame. Terry
-
Just listened to that video, had 237 engines with that exact sound, was a loose exhaust seat, I know it sounds crazy but I had one do that and it ran a long time, just never know how long! Terry
-
I"m going to have to check some of my old manuals on the X107 fill spots, maybe i am getting mixed up with the older single counter shaft transmissions! terry
-
If you try to fill up to plug on right side you will be way over filled. terry as mechohaulic said it has the trough for metal pieces.
-
Depends on which o ring that needs repaired, Yeah the magnet is on the opposite side of fill plug terry
-
If you don’t want to drain it, tip it up so gear oil is in the other end. Terry
BMT Forum Logo
