Jump to content

mrgumby

Bulldog
 View Profile  See their activity

  • Posts

    363

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by mrgumby

  1. mrgumby
    Worth a phone call http://www.continentalengineparts.net/
  2. mrgumby
    No better get goober with the tow truck
  3. mrgumby
    And you call them professional Good think thy aren’t a professional doctor or the would lose all their patience. No more common sense in this world if a machine can’t think for them they are lost
  4. mrgumby
    That’s why I still carry an old fashion map book I like to see where I’m going and what’s around me for alt routes gps is convenient at times but I don’t trust it. All the guys think I’m stupid for carrying a map book
  5. mrgumby
  6. mrgumby
    That will give you an idea of what your looking Like mack attack said pull the end caps get the weight off the suspension give it some grease and see if it gets to the bottom
  7. mrgumby
  8. mrgumby
    Off topic but what ever happened to Hemingway trucking Those Nashua trucks usd to be everywhere seems mmf is around a lot
  9. mrgumby
    Had a stud pilot rim do that when it was cracked. Just another thought
  10. mrgumby
    Have you jacked it up by the frame so the weight is off the suspension. That’s the correct way to do it
  11. mrgumby
    Looks like an old kimball sand truck
  12. mrgumby
    We were all just sitting around one night shooting the breeze and a buddy said the only thing you haven’t tried is a new comp so the next day just for nothing we changed it. Bam no more vibration
  13. mrgumby
    I know this is a little late here but years ago I had a compressor give me a bad vibration and that was the last thing I changed found it by accident
  14. mrgumby
    Did you check the coolant level ? That will make it go off
  15. mrgumby
    Been using stemco 2 piece grit guard for many years with no failures at all. I like the 2 piece because we run many old trucks with pitting on the seal surface all you need is the correct seal installer and good to go. Just my opinion yours may vary
  16. mrgumby
    Did you check the lift pump are your filters full
  17. mrgumby

    Heated Bed

    mrgumby replied to slug's question in Mack Truck Q & A

    No need to heat the body besides if you do they only rot from the inside out I don’t like heated bodies myself just thoughts
  18. mrgumby
    check for a collapsed radiator hose on the inside that will drive you crazy seen that happen many times and it left guys scratching heads until it was found just an idea to check
  19. mrgumby
    looks like something from an old cat d25 end dump
  20. mrgumby
    http://www.engineering.com/Products.aspx?page=comp/BLA030/productdetail/mack-engine-parts
  21. mrgumby
    have you tried here http://www.jobbersinc.com/mack.htm
  22. mrgumby
    does it look like this
  23. mrgumby
    did you check the charge air cooler for metal ?
  24. mrgumby
    you can always put a single wire alt in it and do away with the old style alt and reg
  25. mrgumby
    maybe you need a new relay valve

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...