Joey Mack
-
Posts
10,004 -
Joined
-
Last visited
-
Days Won
225
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by Joey Mack
-
I use the clutch.. and i can drive without it, but of course, im not a "driver". But i know the difference. In a Mack I'm good
-
Any chance the steer hubs are packed with grease ?
-
Steer axle fills through the hub cap..
-
Same oil in both. The check/fill plug is at the rear of the banjo housing. When these rears have been filled, you only check and fill at that rear plug. The oil is carried from the bowl throughout the carrier via the gears and troughs.... 🍻
-
Same oil in both. The check/fill plug is at the rear of the banjo housing. When these rears have been filled, you only check and fill at that rear plug. The oil is carried from the bowl throughout the carrier via the gears and troughs.... 🍻
-
The front drive has 3 drain and fill plugs, the rear has 2. Are you replacing the oil or topping it off??
-
I think 80W-90 is sufficient, it has been used here for decades. Some guys use 80-140 also... Do you have a chart that shows what grade oil for the climate you live in?
-
Sorry bud, i was hoping you would get a break after the clutch job..
-
https://www.wbparts.com/rfq/3120-00-610-6123.html
-
maybe this seller can help you.
-
-
2005 cv713 hi/lo shift grind
Joey Mack replied to trucking251's topic in Modern Mack Truck General Discussion
The tool number you posted is not in my book. Where did you get that number, and what is its job ?? -
2005 cv713 hi/lo shift grind
Joey Mack replied to trucking251's topic in Modern Mack Truck General Discussion
The yoke bolt is a 3AX1803.. it torques to 500+ lbft. -
Thats great news....🍻
-
When you had the valve covers off, did you remove the rocker shafts and use a small straight edge to check valve stem height? Do you know which cylinder is acting up? Did you pull the engine brake celenoids to inspect the sealing rings, are all the push rods properly seated in the lifters? Ok... Ill stop here. Good luck. Oopps, 1 more thing... Are the valve bridges set evenly to .010" ? Ok thats it ..
-
Your a cookoo bird Mech... I need to take a ride north, but i can't.. you do see how many mistakes i make here, dont you??? 🍻😁🇺🇸
-
My Wegovy is free at Walmart. My ins. pays for it
-
We use walmart pharmacy... It works for us. We did not give them our insurance cards, we just use their discounted system.. you know,,,, like the welfare people have....
-
Nothing you can say....
-
Thank you for sharing Dave... It is a solid story. Im blessed to work for my city. My coverage is $20/month on the buy up plan. My wife is fully covered by it at $185.00 / pay check, every 2 weeks. So just under $400.00/ month
-
Ues Paul, i didnt state correctly about alternators and generators.. 🍻
-
Ok. Got it. I was thinking of gennys needing excitement to generate. I do know that alts are hooked directly to power.. hot all the time..
-
Generators need power, alt. make power... Mech ??? Your losin it.. 🍻. Me too...
-
Mark, my guess is he left the lines loosly in place to keep dust out while getting the manifold powder coated.
-
This is "Odds and Ends". Not truck talk.. We talk about truck stuff in other groups... Go there... Or,,,, better yet,,,, start youre own topic here for folks that align with your views... Its an open forum... It is a fair game..
BMT Forum Logo
