Joey Mack

I posted the fuse panel legend... the pics posted in a different order.. but you can see which are EPDM fuses and the others are under the top panel.. What else do you need? jojo

The road to HELL is paved with Dollar Bill's.... Too many powerful people want to be "Living legends" The greed is beyond my comprehension. Jojo

Listen to me when I tell you this...... Do not take it apart before you research the availablity of the parts... I built and 05' this summer and the exh. manifold was not available til november, and the cost was high.. the intake manifold bolts that have the studded ends for the a/c bracket were not available, when buying engine parts, try to use the 11GBA number on the valve cover so that you get the right parts... I do this sh$t every week, and parts B.S. is more work than making the repair... Jojo

#1+2 are the EPDM behind where the clutch pedal SHOULD be... the others are the top panel.. Jojo

is there not a slip of paper under the triangular panel on top of the dash? :). jojo

ok,,,, get the fuel level to about half a tank, have both valves shut off, on hook the hose at the bad valve, have the new one ready with a good dose of thread sealer on it, break the bad fitting loose then snug it back up lightly. Now get a helper and a shop vac, have the helper hold the shop vac over the fill hole tightly,,, then let suction build up for a few seconds. once this is done, keep the vac going, and swap the fitting.... the vac will suck air into the bung where the fitting goes, this will allow you to change the valve with little mess... this also works for replacing coolant sensors... jojo

Isnt the fan on the left side of the evap and heater core I think it pulls air through the cores. if so, the fan assembly slides out for servicing. for some reason I cant picture it correctly in my mind.... sorry, it's been a while and don't remember. so as far as pulling the fan, only if its dirty... Jojo

there isnt a filter... pull the lower center panel below the hvac controls, and loosen the plastic duct that goes into it from the right side.... what i do is, make a cardboard tube and tape it to my shop vac, then flatten the tube so it fits in the small gap you create by loosening the big plastic duct.. then suck the mud out of the a/c core.... ive done so many , i get this done in less than 30 minutes... jojo

So true!!!

Hell yeah!!!

There is a 15/16 headed bolt on the engine block in front of the starter... it does come loose.. and there is a ground wire that go'es from there to the frame behind the left steer tire. clean both and all eyelets... It WILL cause the issue you have... Jojo

The news media has an amazing ability to take an issue that is concerning and turn it into a big problem. And because the internet offers instant knowledge, we react before we think... Sometimes I wish that newspapers were still the way of things, at least we had time to think about what we read, without jumping to conclusions... Now out of nowhere, evreyone is bad, or a racist, or whatever the new hateful phrase of the day is... anyway, I may have gone off course.... In a nutshell....... The media makes a mountain out of a molehill..... Unless the news is against a Lib/Proggresive/Commie..... Then they make a ...... molehill out of a mountain.... Jojo

It's a Mackinnie...

Hey Miller... I am interested.... how can i see what you have,? Not here, P.M. me with good pics and a price that you think is fair.. Jojo

Turbo exchange... Concord N.C. just look it up on Google.. jojo

My heart hurts too... My father, Grandfathers and all Great uncles, and a few Uncles were Combat vets... I was in the army in the late 80's for a short time, no combat.. But the love and respect for our great country is lost and not taught any more because of the commie's in our goverment's and school's.. It's sad and is really going to get us destroyed as a nation... It only took the last 8 month's to solidify this B.S. Thank You M.C. Jojo

Holy S@!t!!! I wish we were-face to-face............ we would have a hell of a time!!! You got this!!! Jojo

Ok... not my issue, but I do have a better understanding for my future posts.. Just glad it was (in-House) and not a hacker... Jojo

All great questions... dont have time to give my opinion on each one, But hell yeah... Great questions. And the real answers wont come from those that are making a damn good living off the Kung Flu... Jojo

I luv ya tenfiveO.... I hope there is none of that B.S. happening here... Jojo

Ok... I read all of the previous 5-10 posts.... There is a boatload of intelligent comments, facts and figure's.... As far as inflated numbers, here is what My wife witnessed last month............. Her brother died in his sleep (napping)... his wife found him, when she went to wake him up for supper... Moving forward..... A doctor, not a coroner, said he may have had a stroke or heart attack..... So thats what the Dr. stated......... Our local Hospital system sent a Rep. She told my sister-in-law that his death was ruled as a COVID Death, she would recieve A $9000.00 check.... She said Hell no!!! he had a stroke... Anyway,,,, something to chew on...... Jojo

I tried to buy from P.A.I. myself, ,but i'm a small fry, so I could not create an account... Heck,, give it a try.... Do you have the Mack part number's?

when I dont have a pressure tank that fill's the system, I remove the highest pipe plug from the water manifold assembly and leav it loose, (1 turn in)... you will hear it whine as the air leaves... this is my own way of doing it, more ides will be posted... Too bad I'm so busy, i would jump in my service truck and come visit... Jojo

So F'n true,,, the masks don't work!!!!! just the fact you can breathe without a filter canister tells it all... They don't work for anything smaller than dust or fluid splatter, ie: during surgery or in some cases they work when mowing the lawn on a dry windy day to keep clippings out of youre pie hole... What also chap's my ass..... is that we are supposed to stay 6 feet apart due to air borne spread.... So why did'nt our Commie gov't tell all business' to shut of thier H.V.A.C. systems.... just a thought... Jojo

very cool. I just looked at internationals, I have a KB-7 and was looking for other ones, I need to get up there and visit... A blast from the past, for me... I used to work in Yarmouth and Freeport, and didn't even know they existed... Too funny.. Jojo