Jump to content

Coenut

Bulldog
  • Content Count

    288
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by Coenut

  1. If its not cracked. It will clean up very well with Sem soap. Any auto body shop will sell it. Works like magic.
  2. Your talking about the paint protection? I would think you would not want any wax or ceramic coating on the paint before lettering. But that's me. I would definitely do it on a new truck. But do it yourself not the dealer.
  3. Hood scoop from an r model Mack. Old but nice. $60.00
  4. It's a 53 with a 220 cummins 5x3 trans
  5. Ricky thank you for letting me know. Since the post I made a spur of the moment kw purchase.
  6. If you screw the thumb screw all the way in it will run. You may have a faulty solenoid. One wire is correct.
  7. Restoration specialties has all of that. Even some with the stainless bead. They are fantastic and will send you samples to verify for before you buy lengths. I used them for the doors on my r model. I have a set of workers that I bought from watts of you need.
  8. I have used Eastwood and did not like it. Por-15 is great, but the prep is key.
  9. They also have 6 sided nutserts that don't spin. A little more difficult than just drilling but worth it.
  10. I have the jack you need. It's yours to borrow if you want too.
  11. I have some odds and ends to finish up on the r700. I like how this looks the way it is. At some point if I decide to dig into this I have some big ambitions.
  12. Yes. Came out of Redmond
  13. Picked this up about a month ago. 220 cummins 5x3
  14. Didnt that belong to someone in this site?
  15. It might not be considered a truck stop by as a kid on the way back from New Jersey. If Hot Dog Johnny's was packed we would always stop at the Crossroads diner on route 46. Back lot was always full.
  16. Looking for a transport from Seattle area to northeast pa. 53 kW 26 ft long 8 ft high 15500 lbs
  17. Sorry for the bad picture. This truck is on my route and has Christmas lights and a blow up snow globe on the flat bed.
×
×
  • Create New...