Jump to content

gearhead204

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,845

  • Joined

  • Last visited

  • Days Won

    11

 Content Type 

Everything posted by gearhead204

  1. gearhead204
    also where the front cross bar mounts in front of the radiator, that mounts on rubber isolators if the isolator fails the hood will be listing to that side. the hood pivots on tie rod ends that are also adjustable with jam nuts.
  2. gearhead204
    my guess that the Japanese have watched the Clintons for too long .......and thought to themselves why die over a business deal.....that's what attorneys are for!
  3. gearhead204
    been trying to get caught up on farm work so I haven't ventured over and got the pics yet of a mid 50's f250 4x4 conversion that my neighbor rescued from his family ranch. I have seen several napco chevs and gmc's in the area but this is the first ford from that era.
  4. gearhead204
    Ok guys humor me this, If there is nothing to see here, why did so many people suddenly plead the 5th.? some thing in tuna town still stinks!
  5. gearhead204
    it will be interesting for sure! as I live in a blue state thanks to the greater Seattle area. As I have travelled around the state in past months I have only seen a hand full of Hillary signs in an ocean of Trump/Pence signs, but in the people I have talked to I cant find more than about 20-25% support for her here. So it might be a while before we join the national revolution, my state may have its own to deal with!
  6. gearhead204
    the problem is half of the country is too busy sexting and texting to worry about their future, and how this should affect the vote they will make.
  7. gearhead204
    common problem on that series with the fuel senders, also check the dash light dimmer switch (next to the windshield wiper knob)
  8. gearhead204
    Yep have to agree with 41Chevy, trumps vote is one in which we hopefully save the supreme court!
  9. gearhead204
    well the green leaker explains the can of zero start mounted on the fire wall!.........Hey Yardo ....season special in isle 9!
  10. gearhead204
    that's one of them places that had better feed me......... cause I would never leave! ,,,,,,,, if they just had a Coors light beer truck there I would call it heaven!
  11. gearhead204
    my 06 f350 fwd dually had the ford death wobble would usually start in a curve with a bump in it found the trac bar end bad, but after replacing that it would still do it but not as bad. replaced all 6 tires and it drives great again this round I bought firestone AT tires will be able to report on the snow thing in a few weeks.
  12. gearhead204
    had BFG on my old f250 and loved them ! then I worked one summer in the woods never had so many damn flats, they were only nylon ply casings, haven't run them since. 255 /85-16
  13. gearhead204
    I would suspect those ar'nt jack bolt holes and are blind holes, I think you will need a puller to push on the steering shaft.
  14. gearhead204
    their heads have been in the clouds for years! that's how all that AIR gets in there
  15. gearhead204
    couldn't agree more! we need some carpet CLEANERS not more carpet MUNCHERS in the white house!
  16. gearhead204
    also a poor injector spray pattern can cause slow starting, is the injector is shooting a stream instead of a atomized mist it will be hard starting.
  17. gearhead204
    Hey....Hey....now just because you had red crayons growing up doesn't mean we all did..........and no I didn't eat the red ones.......had to use them to color the flames!
  18. gearhead204
    well if the stock market gets any worse I will shoot mine and eat them
  19. gearhead204
    if I had to guess a secondary kill cable, possibly routed to the pump panel
  20. gearhead204
    maybe we could install train tracks between the white house and capitol hill............should help eliminate part of the stupidity that comes out of that place, since none of them can make a decision either
  21. gearhead204
    I would say that's more than a side steeped clutch pedal ! a dumped clutch pedal will usually result in a tooth or two being ripped out next to each other, if I had to guess that's some wheel hopping! and or loss of preload thus causing excessive back lash, and improper tooth surface contact!
  22. gearhead204
    looks like some dandy hams to go with them eggs!
  23. gearhead204
    damn! looks great........but the nose on that dog is almost as long as its tail
  24. gearhead204
    look up one of the retired guys, if they have been retired for 6 months they need to get away from their wives for a while and probably for a box of beer will coach you thru it
  25. gearhead204
    B Mack, I sure hope that is a saw dust or snow bucket! the torque tube on a 40 or 420 wont take a full bucket of sand or dirt, watched my uncle snap his 40 in half after getting a bucket full of sand!

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...