theakerstwo

That's it.The lifters that they repair for my friend looks good.They replace the hard face and grind.One of the engines had a problem with coolant in the oild so he replaced the engine and give the old one to me and I took the cam and lifters out for my self.I have used them in a engine of mine but have not put the truck to work yet.

Window 7

Well this is what the liberals wanted.I still think if he could run again same bunch would vote for him.He is not the antichrist but he is lead by that spirit.He is working for one world control.And don't think for a second that he ant got enough suck ups that they are working full time and some may be watching us now.

Why cant I copy and paste? Any way check out Hillcrest cam in little rock ark.They can also replace the surface on the lifters.I have helped install two of them on a friends trucks with out any problems.

Just remember that there is about half of the people that want Hillary and she will be just as bad as this spook.Its got to do will free stuff, our free stuff.

We should go easy on McCain because we don't know what they did with him or to him when he was a POW.He may be doing the best his mine will let him do.

Also there was a special oil that goes in them.

Before you start replacing parts you need to read the ecm for codes.

There is not many drag links like that anymore

That is a shock and there is a link that is missing that goes down to a braket on the axle.

Also make sure the stop is push in and gas pedal is mashed down.

Some guys just need not to pick up tools.

Call a mack dealer with vin # and just ask them what model.Could be a 92 and 93

I cant rmenber seeing a crank with 3/4 thread so it may have been over sized.

This is a 98 ch with 350 engine 9 speed 4.17 mack on air ride.Wet kit with new fuel tank with oil in one end and fuel in other end.new king pins and bushings and new brakes. 17500.00

It goes in the side of the head to a injector.Get the torque specs and don't go over the specs.

Having a Mackatack? Hope things go well and you get out soon.

Any thing to destroy our country.Bad thing is there still are enough people here to vote him back in if he was to run again.

Only exemptions will be for a non American.Our guest will get a pass for so many years.

Windows 8

Why cant we copy and paste?

I run from 200 to 350 miles ever day in the city so I have seen it all.Most of the time its a woman on the phone.I don't know why women need to get in their car when they need to make a phone call.I guess I am just out of date with the now generation.But that stuff can get you killed.Old men and young girls scare me behind a wheel.

The bleed off engine brake is a quitter system than the jake.The 4000 Mercedes with bleed off system with the blue ox is very powerfull and quite.The way it works is it has a dummy valve with a drilling from the combustion cyl thru the valve when it is open back into the intake port.The dummy valve is opened by a small piston power by air pressure controlled by ecm.When you turn it on for braking it opens the dummy valve and as the piston comes up on compression it has been bleeding off compression back into the intake and unlike the Jacobs brake which waites till the piston gets to the top and then lets all compression off into the exhaust which makes a noise it still has done same thing as the jake brake.The energy it took to compress air is not going to help push the piston back down anymore so you use that energy for braking.

I know your right.

Also remember that a jake brake is used or made to use on long grades to keep from using your air brakes heating them up to were they don't hold when the curves are coming up faster then you like. know ever one uses them on almost ever stop but that's not what their made for.