Jump to content

staxx

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    1,089

  • Joined

  • Last visited

  • Days Won

    7

 Content Type 

Everything posted by staxx

  1. staxx
    Welcome always good to have another tech on here enjoy the show.
  2. staxx
    Awsome pics wish I was there to see them in person.
  3. staxx
    Econvance is slow to respond this is normal with age just taking a little more time for oil psi to get to econovance and get things moving in there.
  4. staxx
    If it was a little closer i would go look .
  5. staxx
    Just make sure you get us some pic,s when you get it loaded.
  6. staxx
    If it smokes all the time try doing a cylinder cutout test with truck running a idle crack each fuel line loose at injection pump one at a time to see which cylinder is causing the smoke and miss be careful fuel is under pressure and will make a mess, get the problem narrowed down to which cylinder and we will go from there,
  7. staxx
    You can use a pry bar or long screw driver .
  8. staxx
    There you go that will work
  9. staxx
    Load her tie it down, just watch tire temps on trailer and bring spares.
  10. staxx
    Thought i saw some Mh hoses In lawencburg but the ends were small .
  11. staxx
    Did you get ahold of Hillsboro MH yet
  12. staxx
    Rollers go on the cab side the hood gets steel guide plate were your bolt in your picture is at
  13. staxx
    UD is set to close its doors think they have 800 at port and not going to make anymore.
  14. staxx
    Note the piston and rods pins are the smaller ones pin bore 1.625 with no piston oil cooling nozzel also.
  15. staxx
    I like , needed to exercise my neck again .
  16. staxx
    code 13 is fuel temp sensor 21 is coolant temp 23 is intake temp ... sounds like fuel supply pump issue can check and make sure engine module is not contaminated with coolant or oil check your low coolant sensor in surge tank unplug it and look in connection. Does the truck run good other then hard to start?
  17. staxx
    No the rumble was friday and sat , red B was out of Kentucky and was leaving when I got to it . Sounded good and looked good had a sticker on the back window that said twin stack Mack with a window out back .
  18. staxx
    Looking good be over tommaro see how much we can get done, did you get the bumper in yet ?
  19. staxx
    If anyone want some pics of the air ride front let me know and I will start another post.
  20. staxx
    Here,s a B for you Mike it was at the Redneck Rumble in Lebanon Tn today and the moster truck with the cummins had very cool suspension system and of course my boy was trying to catch a ride on the fire truck .
  21. staxx
    This DOG will never be put down!!!!!!!!
  22. staxx
    Heres a couple more.
  23. staxx
    Heres a couple i found over the last 2 weeks.
  24. staxx
    I will try to get a pic of something in the shop next week for ya while you adjust valve check all your u-joints and yokes make sure the yoke nut at trans or any others have not loosed up this will cause vibration also.
  25. staxx
    No show off would be if I showed picture of how its done.

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...