Jump to content

phildirt

Bulldog
 View Profile  See their activity

  • Posts

    310

  • Joined

  • Last visited

  • Days Won

    4

 Content Type 

Everything posted by phildirt

  1. phildirt
    These are closer- ups of the controls Travis is looking for--- I am looking for a replacement for the digital clock.
  2. phildirt
    I have a set just like that-- not for sale Sorry about that.
  3. phildirt
    E9 500 performance chart.pdf Here are the factory specs- From Mack Publication 5-102, March 1993, E9 Mack V-8 Engine Overhaul Procedures
  4. phildirt
    Didn't intend any insult- sorry about that. I hauled it out of the woods for the current owner about 15 years ago- it had a Mack gas engine at the time, but I didn't pay any attention to what it was. Since then it has had a 673 and a quad added. It is definitly a kitbash- before and after. I am doing some more research to see if there are full build sheets. Don and I did a quick search during Trucktoberfest and found some evidence of it as a B 52. I think a misstamp is a possibility. Couldn't get a good photo/ read on the frame stamp.
  5. phildirt
    From above: "Mack never made a B52 at all.. B53 yes"... See the picture below- somebody better call Mack and tell them that the chinese counterfiters are back at work-- There are some records of this truck in the archives in Allentown- (this post has moved on from what it started from- this information has nothing to do with the truck for sale at the start of the thread) Usually not a good idea to say "never" or "always" when talking about these old trucks- can come back to bite you.
  6. phildirt
    I know of a least one other B52 - owned by a guy in Meadville, PA. There are build records for that truck in the files in Allentown.
  7. phildirt
    Glad that it worked out-
  8. phildirt
    I was always told that the offical color name was baby shit green.
  9. phildirt
    A young man by the name of Scott Lester, Centerville, NY, owned a Farquhar steam traction engine and showed it at many antique tractor shows about 10 years ago. Don't know if he still owns it, but he seemed to consider himself an expert on the Farquhar. Good luck
  10. phildirt
    Wiring diagrams are in the wiki section of BMT.
  11. phildirt
    That would be Daryl Emery- He is one of the ATCA Directors- his contact information is in the Double Clutch magazine.
  12. phildirt
    I have use both Lizard Skin and Dynamat. Both work well and beat using tar paper. You probably only want to these jobs once- do it right and it is cheaper.
  13. phildirt
    Try these folks: http://www.aatrucksleeper.com/rubber-boot-material/
  14. phildirt
    Nothing came up on the last post. The first link looks like it is from BMT- "Sorry, you don't have permission for that!" I am signed in ...
  15. phildirt
    I get a message that says "you don't have permission to view this".
  16. phildirt
    LMack- thanks, that would be a great help.
  17. phildirt
    Lmackattack- I am trouble shooting/ fixing the front rear and rear rear temparture guages on my RW 613. The wiring diagrams I have from Mack don't mention or show anything for these 2 guages. Do you have any info that would be of help? There is a single 14 guage wire coming from each sensor that was cut off just in front of the cab/ firewall. Haven't been able to find continuity from the guages to anywhere on the fire wall. Any help?
  18. phildirt
    Turbocharger for Mack ENDT 673 engine. Schwitzer part # 631GC443. Takeoff from good running engine. Complete and ready to bolt on. Will fit other applications. Will package and ship UPS from 16354 at cost- (it is heavy). Located near Titusville, PA. $400. 814 827-2626
  19. phildirt
    Did you find someone to haul this?
  20. phildirt
    I was thanking Mike- I saw his collection about 12 years ago (I delivered the front half of an R700 for a friend to his yard). It was very impressive even then and I guess it just keeps growing.
  21. phildirt
    SuperDog I ran the RW613 today and tried the shift the way you described above-- It does take a little getting used to but it does seem to be a better transition between low and high. Thanks- love it when I learn something new.
  22. phildirt
    Here is everything you need to know--- The source book is Mack publication # TS50689
  23. phildirt
    Nice photos- thanks for the effort.
  24. phildirt
    No Magnums had to die or were injured to make this wall art. Hood was replaced on a friends truck in its full rebuild, this was the salvadged side. Thanks for the good comments on the shop- it is necessary if you are contantly working on old Caterpillars and Macks.
  25. phildirt
    Just added a wall hanging in the shop---

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...