Jump to content

phildirt

Bulldog
 View Profile  See their activity

  • Posts

    310

  • Joined

  • Last visited

  • Days Won

    4

 Content Type 

Everything posted by phildirt

  1. phildirt
    Put this up on the shop wall for reference---
  2. phildirt
    Give me a call at 814-827-2626 (Titusville, PA). I have some information that will help you out. Phildirt
  3. phildirt
    Why don't you get in touch with the definitive source for this information? The Mack Trucks Historical Museum in Allentown is a wonderful resource and has a huge amount of information available on specific trucks. Here is link to the contact information: http://www.macktrucks.com/default.aspx?pageid=40 I have had nothing but excellent help from the folks at the museum. They normally do not make any charge for services but are dependent on donations. Phildirt
  4. phildirt
    I am still looking for the city and state that these Mack dealerships were located - in in the mid 1980's O'Hare Weigland Mack Versailles Mack Cinti Mack Mineola Mack Thanks Phildirt
  5. phildirt
    Thanks for the help so far-- Still looking for city and state for these mid 1980 dealers: O'Hare Weigland Mack Versailles Mack Cinti Mack Mineola Mack Thanks
  6. phildirt
    thanks- thats a big help Phil--
  7. phildirt
    Thanks for the help so far -- I am still looking for city/ state for these dealerships: (mid 1980's) Universal Mack R-W Mack Sales Fleet Sales Inc O'Hare D and H Mack Sales Trans Power Inc. Weigand Mack Northern Mack Sales ABC Mack Sales Versailles Mack Allied Truck Sales Cinti Mack Jackson Mack Sales Rutrough Mack Tri County Mack Sales Phildirt
  8. phildirt
    Thanks for the help so far- If you find an old dealer directory let me know. Phildirt
  9. phildirt
    I am looking for the city and state that these Mack dealerships were located - all in the mid 1980's. Universal Mack Interstate Truck Equipment R-W Mack Sales Fleet Sales Inc O'Hare D and H Mack Sales Pozzo Mack Sales Trans Power Inc. Weigand Mack ABC Mack Sales Northern Mack Sales Rutrough Mack Mid Mountain MAck Mid South Mack Mountaineer Mack Versailles Mack Allied Truck Sales Cinti Mack Jackson Mack Sales Flag City Truck and Equipment Tri County Mack Sales Lewis Service Center Clement Auto and Truck Thanks for the help
  10. phildirt
    The T2090 is a triple countershaft transmission that has been around for a long time. I have one in a RW613 that has gone a million + 400,000 with a couple of rebuilds. It is handling a 500 + hp E9 engine. I like the way it shifts. I think you could tear it up if you really worked at it. Adelman's wanted $2,500 for a 1 year guarnteed swap (with a good core)about a year ago. The LO gear is plenty low and is fine for yard work. My 9th is .71 and will give you close to 100 mph at 2150 rpms. Price should start at 9 cents a pound - (scrap price) R 2 4 N L 3 5 lo - hi button Skip L on the high side Phildirt
  11. phildirt
    Here is the performance chart for the E9 500 My RW613 has a T2090 (9 speed) with .71 for the top gear and was listed on the build sheet as top speed of 78 mph. It will run over 100 mph at 2150 - hold on tight. E9 500 performance chart.pdf
  12. phildirt
    I have had good luck via the telephone but have NEVER had any reply to an email request to Watts---
  13. phildirt
    The part # is 446 TC 25 WW diesel has several in different stores - dubois and erie, PA.
  14. phildirt
    I am looking for the "step dimension" for the flywheel on a B75 with an ENDT 673 engine (#T673-4B7058). It has a 15" single disk with these numbers: 31165 4106P1. Measured the current dimension at 1.5625 but would like to cross check. It is in front of a 5 speed and triplex. Thanks for the help.
  15. phildirt
    I am looking for a source for a close match for the dark brown vinyl used in the mid 1960 in the B model Macks. It has a fairly deep vein pattern. I have attached a scan of the material. Anyone have any ideas?
  16. phildirt
    a good starting point for valus is $.08 a pound. $ 1,200 at the scrap yard.
  17. phildirt
    like the old mechanic said-- turn up the radio and drive it----
  18. phildirt
    Adelman's has rebuilt 2090 for $ 2995
  19. phildirt
    a yard in blasidell n y sells new door shells for $ 325 cash and carry if you are interested i will get a phone number
  20. phildirt
    If you are getting that much oil you are past the point of ignoring it. Time to fix it now- it only going to get worse and soon your will have oil coming out the airhorns----
  21. phildirt
    I'm looking for the 4 full length and one short lights. I also need the foam bases and mounting screws. Thanks
  22. phildirt
    I'm looking for a source for KD 516 marker lights for a superliner. We used to call them "bus lights". I need 4 1/2. Thanks
  23. phildirt
    I have had it for several years- in storage while i worked away. It is in a Superliner Magnum from 1985. Thanks for the information.
  24. phildirt
    I need to know what the oil capcity for 500 HP E9 in a Superliner application is- how many quarts? Thanks
  25. phildirt
    You really need to get your hands on the shop manual for alingment of the tandems. It tells how to measure, lay out and aling things. Start with the springs- look for broken leaves any other problem and then go for the alingment procedures. I got my frame book off of ebay for about $ 50.

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...