Jump to content

rockyvander

Puppy Poster
  • Posts

    4
  • Joined

  • Last visited

rockyvander's Achievements

Rookie

Rookie (2/14)

  • First Post
  • Conversation Starter
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

0

Reputation

  1. I have an 84 E 6 engine in a 1960 B61 , an older crank was installed that required the old lead rope seal , anyone out there that is familar with this and where to get new seal ?
  2. Just completed a trans swap from a 6 speed mack with a lo-hole to a T2090 Mack, one problem clutch stays disengaged , I have about 1" of play in pedal but clutch will not disengage , any ideas ?just thought I would see if anyone else has had this problem before I tear back into it would appreciate feed back--thanks --rocky
  3. Jason I have a mack X1071 6speed with low-hole 2 stick it came out of a 1984 mack are you interested --Rocky
  4. I have a 1960 B61 with a 1984 E6 engine and 6speed with Lo-hole trans , I plan on replacing with T2090 mack 9speed has anyone made that swap and if so how did it go and what parts would I need with the 9speed other than gear shift and air shifter , I am currently using the 84 mack trans mounts with a pull clutch would appreciate suggestions --thanks --Rocky
×
×
  • Create New...