Jump to content

alex g

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    1,529

  • Joined

  • Last visited

  • Days Won

    4

 Content Type 

Everything posted by alex g

  1. alex g
    Bumping this post back to top so it doesn't get lost. Sent from my SM-G386W using Tapatalk
  2. alex g
    You can still get them from mack dealer. Could be your cable that runs to it though. Sent from my SM-G386W using Tapatalk
  3. alex g
    Hobert62. Big bumper is sold to another BMT member and leaving Monday for Georgia. Thanks for the compliments on my truck and thanks Keith for shooting and posting video Sent from my SM-G386W using Tapatalk
  4. alex g
    I did all my own stunts on that video lol. Hope everyone understands it's still winter here and even knowing there's no snow it's hard to keep a truck clean. Sent from my SM-G386W using Tapatalk
  5. alex g
    I think CH parts will be available for a while yet. I run a R model and thru this website and always on lookout for extra parts I keep it running.
  6. alex g
    I've never replaced spring bushings but I doubt a propane torch will be of much help for that job. You'll probably need a real torch. Sent from my SM-G386W using Tapatalk
  7. alex g
    A old 15 speed should have a high low selector on stick and a deep reduction usually on dash. Deep reduction is your first 5 gears to get you out of a hole then 5 low and 5 high. A 10 speed is five low then shift 5 gears in high. Not sure why shifter looks like a 12 speed it could be a 6 or 7 speed shifter.
  8. alex g
    Try P.A.I truck parts they sell alot of Mack stuff Sent from my SM-G386W using Tapatalk
  9. alex g
    I have some Trans parts is that a gear or shaft. I'll take a look this week. Sent from my SM-G386W using Tapatalk
  10. alex g
    Do you know what gear or part # he needs Sent from my SM-G386W using Tapatalk
  11. alex g
    Can't help with cummins questions but floor mat and hood pieces are available at Watts mack. Check out there online store.
  12. alex g
    Very nice lasting tribute Sent from my SM-G386W using Tapatalk
  13. alex g
    I'll probably put some tinka tinker caps on Sent from my SM-G386W using Tapatalk
  14. alex g
    Alot of people have same issue and they put a step below the first one. It seems to help alot. Sent from my SM-G386W using Tapatalk
  15. alex g
    Just got truck home from getting my new stacks. 5 inch straight pipes no mufflers to complicate things. Has a good bark to it and sounds even better when I hit the engine brake. Sent from my SM-G386W using Tapatalk
  16. alex g
    I have a new one I'll pm you Monday Sent from my SM-G386W using Tapatalk
  17. alex g
    There's a good history of them in a old Wheels of Time. Sent from my SM-G386W using Tapatalk
  18. alex g
    My bumper is made by Ali-arc. I bought it used I think it actually came off a freightliner. I called Ali-arc they said they never made a bumper for a R model I was hoping I could buy mounting hardware. I had a local guy fab the brackets up for me. I assume you'll gave to go same route. Sent from my SM-G386W using Tapatalk
  19. alex g
    Tallman transport in Welland Ontario had a E6 Mack in a IH Eagle cabover. They called it the Beagle. Sent from my SM-G386W using Tapatalk
  20. alex g
    Was that at York P.A. show. She's a beauty Sent from my SM-G386W using Tapatalk
  21. alex g
    Not sure but years ago in a company truck I had similar problem. I think it was governor in pump that failed. I know we ended up changing pump. Hopefully someone on here can elaborate. Sent from my SM-G386W using Tapatalk
  22. alex g
    Thanks I'll call gunnite. Also try find it parts after I get #s Sent from my SM-G386W using Tapatalk
  23. alex g
    Should be a tag but if you call mack with your serial # they'll give you any original info you want on truck. Sent from my SM-G386W using Tapatalk
  24. alex g
    You guys got some big guns in Washington State by the looks of the holes in that dump truck.
  25. alex g

    Rklahs

    alex g replied to rklahs's question in Mack Truck Q & A

    Check your throttle linkage it could be unkooked or backwards.

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...