Freightrain

Thanks guys. I have the technology to make anything fit!!

The center pin broke inside. It's junk.

The pin broke in half as I pulled it. Lucky I was in the driveway after a short test drive to check out my new jakes. Was able to get the truck in the garage before it leaked down. I poked around eBay to see if I could find one to no avail. Guess I need to upgrade but want to use my antique chrome knob. I hope the pin sizes are universal.

Seem to recall some gimmick you plug into your lighter that made race car sounds. Maybe it was just a spoof on YouTube?

Ya, I remember doing the starter on my B. Ugh, to get that thing wrestled up in there and a bolt? WTH? Now I have a nice, light, aluminum air starter! WIN!

That took BALLS!!!!! (the union wannabee)

I can see how/why the inner race "could" turn. You put preload on the bearing with the nut(against the inner race), but the inner race is not really held in place by anything. It surely does not "spin", but could move if the preload was light enough. In all my years of it, I have never seen a spindle with heat damage/scoring from that inner race spinning at high speed. It is always just a nice slip fit. The only time you run into problems is when the bearing fails and purposely spins the inner race and welds itself to the spindle. That is when it gets ugly.

Welcome to the forums. They make Jakes for those old 673T's, so first thing is to see if it has spacers under the valve covers? Switch on the pump arm? If it has them, maybe the dash switch is broke/missing?

Got 5 hole wheels on it still. Ya, looks like it could use some suspension work? Pins missing? Did someone cut and paste that pivot mount in the frame(like really poorly?) Got a face only a mother could love, but kinda cool in a nostalgic way.

Now that's a truck...

Craigslist find: https://akroncanton.craigslist.org/cto/d/1978-mack-350/6522051086.html 1978 Mack 350 - $6500 (Dalton) 1978 Mack semi tractor 350 hp rebuilt Mack pedigree engine 8000 miles ago live tandem axles 5speed truck runs great asking 6500 call 330 fourone791twothree No connection, just passing it along.

Think I saw something the other day about this, maybe on Facebook? Had some fighters sitting on the floor and looking in decent shape(for being underwater for a long time).

I found the muffler on the cab had near as bad drone inside as the rattle from a straight pipe. I ended up putting a Dynomax 4" "racing" muffler(basically a big cherry bomb) under the cab and then a pipe up the side. Clean look and made it bearable noise level inside. You could get a std muffler and have it ceramic coated silver?

I used a stemco 2 pc on my truck a few years ago. All I could get my hands on in a pinch. Still dry, I've heard horror stories about them, but with the little mileage mine gets I hope it lasts my lifetime. I did the bearing like I do my pickup. Crank it tight while spinning, back off, then snug it up til the lock ring finds a hole.

I have that style of vent in my bunk. Works well. Open either way(front or back) and had detent to hold it. You can get chrome versions too. I can get you sizes if interested. My cab has a passenger side vent. It has a rod coming in the cab to operate it, though it is broke off(and I don't use it since I have a/c). It is under the air cleaner(I have the big cleaner, not the winter/dual inlet style). In the picture, to the right of the heater there is a panel. There used to be a knob sticking out the little hole that you pushed to open the vent. The door over the opening would direct the air into the heater or open for fresh air.

Karen doesnt get quite as excited but after 11 years she still travels with me.

Yup, talented lady for sure. Karen jokes about driving my truck, but we would never get there since she won't shift out of first gear.....LOL!!! I tried teaching her to drive stick some years back. My '67 F100 was super easy, power steering, power brakes, smooth/easy clutch. She would stop before getting it into 2nd gear. I told her she had to PUSH on the gas and GO!! Nope, we made a few slow trips around the mall parking lot and that was the end of that class.

Salvageable? I guess it depends how much you like to weld? LOL!!

I wonder if you couldn't machine the spindle to fit a 517 pin? Is there material? Pin long enough? Just thinking outside the box. My truck has 517 and I did the pins about 16 yrs ago.

And here I thought the B model was a horrible dash design? I kick and scream every time I have to even THINK about pulling the dash panel to get to something. You can't do it. It's bad enough the steering column is in the way, but you have to squeeze your hand in there first to get tach cable loose so you can pull the panel out enough to even get to anything. Make sure the batteries are unhooked, as the key switch is HOT and if you lean it down it will touch the dash and POW!!! Glad to see you got the air steering working. I had to rebuild my mounting points as they were all egged out. Lucky I work at a machine shop!! Did you put a flip valve to turn the steering off? Did you add another air tank? I did both. Don't usually need to ever turn it off, but the extra tank helps a bunch.

Don't remember much about it, other then the cafeteria style serving. I suppose back in the late 70's it was the in thing. I suppose it isn't too much different then Golden Corral today? It sure was a "different" time and I'm old enough to remember it.

LOL!! Ya, it is convenient to put it there to keep it under cover. Only have room in the shed for one tractor(the 149) so until spring that is where it will sit. When I picked it up from my friend it was sitting in the back yard, under a ripped old tarp. We had to drag it out of the woods with his bigger tractor as the tires were all flat and it is hydrostatic and the pressure relief handle is missing. We actually were able to put some gas in the tank, a battery in it and it started and I drove it up the ramps into my pickup. I was surprised.

I just googled it, there is one in Columbus, Ohio. There was one in Canton many years ago, inside the mall. I can remember going there when I was young.

York Steak House.......oh what a blast from the past!!