880joe
-
Posts
542 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by 880joe
-
Thanks for all the replies guys. I got the information I was looking for.
-
I thought that you needed to retard the timing on a diesel and increase it on a gas engine to gain hp. This seems backwards if I'm thinking correctly
-
So is there 6 degrees difference in timing of 400 and less and over 400
-
How many degrees difference is there in the offset key versus the straight key? Also does it advance it or retard it?
-
R.E.D. you said 1 eup was higher in pressure at 413 others was 340 to 370 what is pressure when new?
-
2001 100th aniversary edition
880joe replied to 880joe's topic in Modern Mack Truck General Discussion
Looks like Vanderhags in KC Mo parted a nice one out -
My dad hauled some rip rap on that project
-
I have a couple of 2090's that I would sell but I'm in Missouri you can probably find something closer
-
What diesel shop are you using that can test the eyp' s
-
If you could post or pm me the part numbers I may know where 1 is at. What does mack want for 1?
-
Have you got a part number
-
Is it really needed to have the eup's programmed? I have changed several and never did that but only on 1 set couldn't tell any difference in the way they ran just in my wallet when Mack got done with me
-
2001 100th aniversary edition
880joe replied to 880joe's topic in Modern Mack Truck General Discussion
Just how many were made -
Watts Mack used to have them for sale
-
The 460 Should still be available from mack but will have to send into mack and get approval from them and pay for horsepower upgrade and most people say the 427 runs better than the 460 it has a flatter torque curve. If it were me I would turn it back to the 355/380 program I think they pull better than the 427 or 460
-
Sold
-
So were the new 427/460 injectors stock or oversized?
-
Looks like an aftermarket exaust brake that has been added to me
-
I had a 92 CH Mack that did that if I remember correctly they told me that somebody was probably poking the cruise control switch mutipal times quickly and caused a default code so I took it to mack and had it reset never caused problems after that
-
I can do that
-
50 miles north of Springfield Mo
-
I have a 2 stick 12 speed for sale make an offer I'm tired of it being in my way
-
Would anyone on here know the production numbers of the 100th aniversary edition visions
-
Mine is a 99 year model with the proprietary axle ends I'm pretty sure after your explanation of difference. I'm almost sure mine has fine spline axles also
-
Also how can I tell if mine has R series spindles
BMT Forum Logo
