880joe
-
Posts
499 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by 880joe
-
Not sure on a 97 but my 99 has fuse box on outside of firewall by steering shaft that seems like I had similar issues and was a bad relay or fuse connection
-
You would probably have to use the 4560 Allison as the have a .60 overdrive where the 750's are direct drive your 2080 will be a .60 overdrive also
-
Yes they made single stick 6 speed pretty sure they were also designated a 2060 model same as the air shift 6 speed
-
I believe they have a .71 overdrive the same as a 2090 so it should run highway speed ok
-
V Mack 1 was rectangular and Mack did make a 1 to 2 conversion I don't know what it consists of or if it's still available and seemed pretty pricey
-
The 460's were the only one's wastegated I believe
-
Stretching R model hood
880joe replied to SpreadingLime's topic in Exterior, Cab, Accessories and Detailing
There was one at Norwood Truck Wash Norwood Mo probably closer to you and cheaper -
I may be interested in whole truck for parts
-
Where is the truck located?
-
Didn't e6's have drive in freeze where the endt's had screw in freeze plugs
-
FJH I'm curious as to how the extra transmission maxed out ecm memory. Could you shed more light on the situation what did engineering tell you happened
-
Pretty sure you have to pull the dash out to change the bulbs
-
The 355/380 is only 100 less pound of torque than the 460. Do you already have the 355/380 ecm?
-
You should be ok to run the 355/380 ecm. I was told 400hp and under had same cam timing 427 &460 was keyed different their has been others on here that tried the bigger hp without changing cam timing and ran hot also. If it were me I'd put the 460 injectors and turbo and 355/380 ecm and run it
-
Yes they made 2 stick 12 speeds
-
I believe it was Brett on that was running a turned up e7 running a blixton tuner then went to a full mechanical pump maybe he will chime in before long
-
Would a head from a 84 or 85 2 valve e6 be the same?
-
Yes 15/40 motor oil
-
1995 mack ch t2180b transmission
880joe replied to Playinghooky13's topic in Engine and Transmission
Can't say for sure but pretty sure it will fit right in it's just the newer replacement model -
Joey I can heip you out with that engine if need me to I'm about 2 hrs from it
-
I can measure mine tomorrow but I would guess about 87 or 88 inches
-
R model battery box lid
880joe replied to hicrop10's topic in Antique and Classic Mack Trucks General Discussion
Was his name Doug Fetterly? -
PAI part number for exhaust stud EST-0421
-
I'll look in pai book tomorrow and get you a part# if someone else doesn't get you one sooner
-
I just bought a pai exhaust kit today. pai part# 831016 about 230 dollars 12 studs 12 nuts and 6 gaskets
BMT Forum Logo
