Jump to content

237 head gasket replacement won't fire

Recommended Posts

Went through heads. Valves gaskets everything. Re assembled..... Truck refuses to fire.  Been constantly cracking and bleeding injector lines. Fuel pumping there.  Injectors were all the done. New nozzles and pressure set.  She acts like she wants to go but isn't quite there.  Any suggestions?

Link to comment
Share on other sites

What the Milkman Said...

Start Ya Bastard” Engine Starter Promises to Save British Motorists from  Winter Blues | Latest press releases | PressGo | Journalism.co.uk



  • Haha 1

"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -

Link to comment
Share on other sites

blow air into the fuel tank...i have to do that quite a bit to start my DM....but i havent changed any of the worn out fuel lines yet....good luck...bob

Link to comment
Share on other sites

I would temporary install electric fuel pump into the fuel supply line or even attach a hose with such a pump and sunk into a jerrycan. Straight jumpering electric terminals takes all air and so from the primary circuit in less than half a minute. Than I would crank with the pump still on. If it's a matter of fuel supply or air the engine would start quite soon. If not your way is to investigate assembly mistakes. Such as injection timing, cam shaft timing, valves adjustment etc.

Никогда не бывает слишком много грузовиков! leversole 11.2012

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Create New...