Jump to content

Mack 13 Speed to 18 Speed Conversion


kevgibbs

Recommended Posts

  • 2 weeks later...

To do it the proper way there is also a piece on the trans a plate of some sorts that has to be changed. When I worked at Mack the mechanics did quite a few of these on new trucks that were ordered as 13's and customers changing their minds. This was back in the late nineties.

  Cheers.

Link to comment
Share on other sites

12 hours ago, Macktech20 said:

The way I have always done it. Is to remove the shifter knob cover. Take the nut and the washers off of the top. Take the two torx headed screws out of the top. Then your knob comes apart in two pieces. Leave the bottom of the knob on the stick. Theres going to be a thin plastic tab on the red compound switch, cut it off and then put the knob back together now you have an 18 speed

Yup Job Done!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...