68-f-model Posted January 4, 2016 Share Posted January 4, 2016 Long story short. Both of my doors decided not to want to open yesterday when I went to get out after turning it around in the yard. I had let it idle for a couple hours to run some diesel winter additive through it. Both doors worked flawlessly all morning then suddenly I have to climb out a window of a cab over. The drivers door has been apart a month ago and I cleaned and greased up all the mechanisms while I was in there so I am surprised it is stuck.Anyone know of a trick to get the doors open without having to remove the inner panels? Quote Link to comment Share on other sites More sharing options...
fxfymn Posted January 4, 2016 Share Posted January 4, 2016 Was the truck moved out into the cold while it ran? If so, my guess would be they froze and will open after they thaw out. Quote Money, sex, and fire; everybody thinks everyone else is getting more than they are! Link to comment Share on other sites More sharing options...
68-f-model Posted January 4, 2016 Author Share Posted January 4, 2016 It has sat outside since this summer and was running continuously for a couple hours till I climbed in and turned it around then shut it off and couldn't get out. No real time to freeze up since it was all still warm. Quote Link to comment Share on other sites More sharing options...
Freightrain Posted January 4, 2016 Share Posted January 4, 2016 I'd think some frost might have something to do with it also?I've had my compressor governor freeze up after I pull it outside in the winter and shut it off. Won't build air when I restart it. Once it heat soaks it works fine again.Feel lucky you are young enough to get out the window LOL!! 1 Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment Share on other sites More sharing options...
h67st Posted January 4, 2016 Share Posted January 4, 2016 I second what fxfymn says...I've had some luck warming the door in the latch area with a blow dryer. 1 Quote Link to comment Share on other sites More sharing options...
68-f-model Posted January 4, 2016 Author Share Posted January 4, 2016 Yeah my uncle was laughing his butt off at me weaseling out the window. I am glad I am 6'5" with long arms and legs or I doubt such a maneuver would have been possible.I'll see if my heat gun can warm things up and get them moving. I am leery of to much heat as I soaked them down last night in a ton of PB blaster. I don't need any fires.What is the best lubricant to keep them from freezing up again? I was planning on a chain and cable type lube? Quote Link to comment Share on other sites More sharing options...
Freightrain Posted January 4, 2016 Share Posted January 4, 2016 Strangely enough you would think they would stick "open"(not want to latch), not closed? That's kinds scary.I'm guessing they would not open from the outside either? that leads me to believe it is the latch itself, not the handle part. Really odd they both stuck. Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment Share on other sites More sharing options...
Superdog Posted January 4, 2016 Share Posted January 4, 2016 They wouldn't open with the outside handle either? Quote Link to comment Share on other sites More sharing options...
68-f-model Posted January 4, 2016 Author Share Posted January 4, 2016 Neither handle would work inside or outside and it was only closed maybe 2 minutes after I opened it to climb in and turned it around. Quote Link to comment Share on other sites More sharing options...
Superdog Posted January 4, 2016 Share Posted January 4, 2016 Neither handle would work inside or outside and it was only closed maybe 2 minutes after I opened it to climb in and turned it around.that's strange,I've had the inside handle quit working more times than I can count,got to be a habit to always reach out window &open door from outside,once Mack switched to the current style latch,that problem seemed to go away.don't ask me why. Quote Link to comment Share on other sites More sharing options...
41chevy Posted January 4, 2016 Share Posted January 4, 2016 I've had the Latch freeze on both the doors of my R a few times from moisture between the door latch and the jamb.. Didn't take a lot either. I ended up using (as weird as it sounds) Penn Reel Lube on the latch assembly. Put it in and on it with an acid brush. no more problems Paul Quote "OPERTUNITY IS MISSED BY MOST PEOPLE BECAUSE IT IS DRESSED IN OVERALLS AND LOOKS LIKE WORK" Thomas Edison “Life’s journey is not to arrive at the grave safely, in a well preserved body, but rather to skid in sideways, totally worn out, shouting ‘Holy shit, what a ride!’” P.T.CHESHIRE Link to comment Share on other sites More sharing options...
Back In Black Pulling Posted January 4, 2016 Share Posted January 4, 2016 Just a thought but did you happen to pull the handle the wrong way and lock the door Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.