Jump to content

Hayseed

Moderator
 View Profile  See their activity

  • Posts

    1,087

  • Joined

  • Last visited

  • Days Won

    4

 Content Type 

Everything posted by Hayseed

  1. Hayseed
    A quick google search came up with this.... https://www.napaonline.com/en/search/replacement-parts/steering-and-suspension/tie-rod-ends-and-sleeves/heavy-duty-parts/mack/r700/1983/201579881 I realise the year is Different, But. Take your Old one with you & they should be able to Match It up...!!! Draglink/Tierod Ends are very common generic Parts...
  2. Hayseed
  3. Hayseed
    That He Did... https://www.bigmacktrucks.com/topic/31725-those-hayes-clipper-100-coes/?do=findComment&comment=493011
  4. Hayseed
    Here in Australia, the Anthem is AMT only. the rest of the Range manual is a Option. However with the Titan & Superliner The Manual is Limited to 600Hp. If you want the 685Hp It's AMT only.
  5. Hayseed
    I wasn't making Fun of Len, (Far From It) I was Merely pointing out that He had revived a Thread that was one Month short of 10 years Old, since It's last Post....!!! The Member in Question only has made 4 posts Forum-Wide. .All in this Thread from 10 Years ago. & who hasn't logged on since then..!! The chances of RNRLOBSTA reading & making use of Len's Posts is (IN My Opinion) Slim to None....!! I wholeheartedly Agree...!! You clearly have real-world Practical Experience in working on Mack Product. Which(In My Opinion) trumps Theory & Book Knowledge every day of the Week..!!
  6. Hayseed
    The Bigger the Exhaust, the Smaller The Appendage of the Steering Wheel Attendant............. Just an Observation....
  7. Hayseed
    Thanks Swisho, The Link is well worth Reading. The Truck Pictured Beat Tyrone Malone's Purpose built Drag truck by 2 Seconds (14.8 seconds for the 1/4 Mile) & was a Fully registered Truck that went back to Work on Monday..!!
  8. Hayseed
    Yes It Does.. Photo is very Current (Taken in April 2022)
  9. Hayseed
    Not being Rude Len...BUT, you're 9 Years & 11 Months behind the Times.....🧐
  10. Hayseed
  11. Hayseed
    I'm with Joe, I'd also send a Bill to the No-show..!! He Might learn not to take you for Granted..!!
  12. Hayseed
    Not Mack related But in the same vein... 40Yrs ago My father Bought a new 4240 John Deere Tractor, & one on the Fuel Lines Cracked. He got a new one under Warranty, But In the packet with the New line was a Diagram of where the Little Clamps needed to be to stop the harmonic Vibrations which caused the Cracking. I remember that Factory Placement of the Clamps was Nowhere near where they Needed to Be according to the new Diagram...!!
  13. Hayseed
    Yep, just like when you pull the Plug in the Bath/Sink our Water circles the drain the opposite way to you Guys..🛁
  14. Hayseed
    sgosine577 Hasn't logged in since October 2018.. So I very much doubt he'll reply.... As an aside, There's a Guy here in Australia who Sells an All Aluminium & Brass replacement manifold..!! It's a Million percent better than the POS Genuine Plastic One..
  15. Hayseed
    He also did the Voice over for the Ads too.
  16. Hayseed
    I Don't think so Joey... I too have to go through & edit each & every Post. Just like you have been. (If there's another way ? I'm unaware of It) Be best to send a message to One of the Admins, as they have "Back Room" access ..!! https://www.bigmacktrucks.com/staff/
  17. Hayseed
    Mine Too..
  18. Hayseed
    The slippery Slope just got a LOT Steeper......another once proud Truck maker prostituted into obvilion..
  19. Hayseed
  20. Hayseed
    You obviously have a Good Tyre Management in Place.. You could Cap your Cases using Michelin's recamic Process & do It all again & again..
  21. Hayseed
    I doubt It... I'm a big believer in the following philosophy...
  22. Hayseed
    You would Hope Not... These days Most E9 parts are made from Unobtanium....
  23. Hayseed
    The last thing a One Man band such as yourself needs is Too much Work.!!! . People Start complaining about you taking Too long to get to them... (Ask me how I know This) If You're steadily Busy, I would just keep doing what your Doing. .Word of Mouth advertising is the best there Is.. Also You have a wife & young Child (or is It Children?) Best advice I ever got about being a parent is; You can only watch your Kids grow up Once!! You need a good work life balance, & It's pointless being the richest Man in the Cemetery.. Just My 2 cents worth..
  24. Hayseed
    They're Close... It's becoming quite common in the Mining industry Down here . https://www.australianmining.com.au/features/remote-control-mining-in-a-time-of-need/
  25. Hayseed
    ^^^ Plus one to This..

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...