mcratchet1 Posted June 10, 2022 Share Posted June 10, 2022 I have 07 mr688s some morning it takes about 10 mins to build air most days only about 2 mins. I replaced governor check for air leaks and serviced dryer. Replaced filter and purge valve. I have had this truck 2 year I don’t when air compressor was changed. Is this a sign of my air compressor starting to fail? Quote Link to comment Share on other sites More sharing options...
Onyx610 Posted June 11, 2022 Share Posted June 11, 2022 (edited) Getting oil in the tanks? You could have a stuck unloader valve. Take them out and clean them. Or just get a unloader valve kit. Edited June 11, 2022 by Onyx610 Quote Link to comment Share on other sites More sharing options...
BOBWhite Posted June 11, 2022 Share Posted June 11, 2022 Does it have a Bendix? Ours always pukes oil into the tanks but we haven't had much problems with it building air Quote Link to comment Share on other sites More sharing options...
Onyx610 Posted June 11, 2022 Share Posted June 11, 2022 Oil in the tanks means compressor is on the way out, there is an allowable limit of oil to water. Oil in the air system ruins air dryers and creates problems for the air valves. Quote Link to comment Share on other sites More sharing options...
Hayseed Posted June 11, 2022 Share Posted June 11, 2022 Check that the Airline between the Compressor & the Wet tank isn't carboned up..! 2 Quote "Be who you are and say what you feel...Because those that matter...don't mind...And those that mind....don't matter." - Link to comment Share on other sites More sharing options...
Popular Post fjh Posted June 11, 2022 Popular Post Share Posted June 11, 2022 (edited) 16 hours ago, mcratchet1 said: I have 07 mr688s some morning it takes about 10 mins to build air most days only about 2 mins. I replaced governor check for air leaks and serviced dryer. Replaced filter and purge valve. I have had this truck 2 year I don’t when air compressor was changed. Is this a sign of my air compressor starting to fail? E7 Gray Or Mp 7 -8 Red ??? If its a Gray engine you may have to replace the compressor Head! They get carboned up! Edited June 11, 2022 by fjh 3 Quote Link to comment Share on other sites More sharing options...
Joey Mack Posted June 11, 2022 Share Posted June 11, 2022 I have replaced quite a few steel pipe on MP's due to carbon build up.. jojo 1 1 Quote Link to comment Share on other sites More sharing options...
mcratchet1 Posted June 15, 2022 Author Share Posted June 15, 2022 No oil at all ever comes out of tanks at night I will check lines for build up thanks Quote Link to comment Share on other sites More sharing options...
mrgumby Posted June 17, 2022 Share Posted June 17, 2022 (edited) If it’s a wabco those parts aren’t cheap anymore. The head parts and unloader valve are almost as much as a new comp I Edited June 17, 2022 by mrgumby Quote Link to comment Share on other sites More sharing options...
Joey Mack Posted June 17, 2022 Share Posted June 17, 2022 excuse me? but what engine are we talking about?? Quote Link to comment Share on other sites More sharing options...
Jamkar Posted June 26, 2022 Share Posted June 26, 2022 Spray some soapy water on hose from compressor to wet tank, I’ve had a few fail from heat. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.