Moparmike Posted April 15, 2021 Share Posted April 15, 2021 Ok guys funny y shape water hose mack came up with got a hole in it mack says they don't have any and there almost 400 when they do Any body come up with a better solution to this crazy piping Small hose runs from thermostat housing to large water hose under oil cooler it spit right where they put the small hose into the large hose ..any help would be appreciated Quote Link to comment Share on other sites More sharing options...
880joe Posted April 15, 2021 Share Posted April 15, 2021 I believe this was discussed on here before and was said you can get that hose from PAI Quote Link to comment Share on other sites More sharing options...
Mackpro Posted April 15, 2021 Share Posted April 15, 2021 I wondered about making the “Y” from metal gas pipe fittings , that way you could use 3 pieces of straight hose . A “Tee” and a smaller elbow and a reducer bushing and 3 pipe nipples and your done 1 Quote Link to comment Share on other sites More sharing options...
Mark T Posted April 15, 2021 Share Posted April 15, 2021 Doesn't that hose have a screen in it ? Or was that on newer ones Quote Link to comment Share on other sites More sharing options...
Joey Mack Posted April 15, 2021 Share Posted April 15, 2021 Are you talking about the square plate type oil cooler hose thats behind the cooler? Quote Link to comment Share on other sites More sharing options...
Vmac3 Posted April 16, 2021 Share Posted April 16, 2021 That blue silicone hose has a screen in the lower "tee" portion going into the lower rad hose. V Quote Link to comment Share on other sites More sharing options...
Moparmike Posted April 29, 2021 Author Share Posted April 29, 2021 Got the new hose from pai 140 to my door Thank you for your help guys Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.