Popular Post leversole Posted April 4, 2014 Popular Post Share Posted April 4, 2014 Now that I have a shop...I've been busy buying stuff to fill it up...working on the trucks every now and then......had a small hobby machine shop back in the day...getting back into it...Bought a Mill...Gotta have a welder to build a trailer hitch for the SuperLiner...Superliner had her 25th birthday!Template for the hitch plate...gonna have it waterjet cut...Bought a Lathe last week! 5 Quote Link to comment Share on other sites More sharing options...
Timothy Maikshilo Posted April 4, 2014 Share Posted April 4, 2014 Very nice! Good luck with your "machine shop"! Quote Link to comment Share on other sites More sharing options...
hatcity Posted April 4, 2014 Share Posted April 4, 2014 Who are you?, and what do you want with us? Quote Success is only a stones throw away.................................................................for a Palestinian Link to comment Share on other sites More sharing options...
Popular Post leversole Posted April 4, 2014 Author Popular Post Share Posted April 4, 2014 Still run the dogs regularly!! 6 Quote Link to comment Share on other sites More sharing options...
j hancock Posted April 4, 2014 Share Posted April 4, 2014 Always wanted a Bridgeport. Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
41chevy Posted April 4, 2014 Share Posted April 4, 2014 Always wanted a Bridgeport.I have a Gordon 3 axis Profiler I may sell soon. Paul Quote "OPERTUNITY IS MISSED BY MOST PEOPLE BECAUSE IT IS DRESSED IN OVERALLS AND LOOKS LIKE WORK" Thomas Edison “Life’s journey is not to arrive at the grave safely, in a well preserved body, but rather to skid in sideways, totally worn out, shouting ‘Holy shit, what a ride!’” P.T.CHESHIRE Link to comment Share on other sites More sharing options...
j hancock Posted April 4, 2014 Share Posted April 4, 2014 Probably more than I could handle! Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
rsb502 Posted April 4, 2014 Share Posted April 4, 2014 Showoff! Lol, wouldn't mind having that mill around for a while. Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment Share on other sites More sharing options...
blackdog2 Posted April 4, 2014 Share Posted April 4, 2014 Always wanted a Bridgeport.We have a Bridgeport down here you could have but you will have to take al the riff raff that goes with it. We move a lot those.all buildings are gone. Quote Ed Link to comment Share on other sites More sharing options...
j hancock Posted April 4, 2014 Share Posted April 4, 2014 We have a Bridgeport down here you could have but you will have to take al the riff raff that goes with it. We move a lot those.all buildings are gone.Yeah, last time I took the scenic route through Bridgeport on 95, the scenery on either side of the road was looking pretty special. Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
Freightrain Posted April 4, 2014 Share Posted April 4, 2014 Nice collection growing in the shop!Luckily I work where I have 3 Bridgeports to chose from and two large G/L horizontals to use(one has 4x8 table). Throw in dozen or so lathes, one is 40ft between centers LOL!!I do have a small table top mill at home, antique JET about 40 yrs old. This thing took the engine crane to put together and set up. 9x24 table, Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment Share on other sites More sharing options...
mowerman Posted April 4, 2014 Share Posted April 4, 2014 wow excellent,,,have a ball...bob Quote Link to comment Share on other sites More sharing options...
41chevy Posted April 4, 2014 Share Posted April 4, 2014 Probably more than I could handle! A little bit bigger than Leversoles Bridgport. Has NC control and a 3 axis tracing head with new stylus unit and computer. Bought that, 6 other machines, a Vector Machine and a multi welder when Grumman Aero Space and Republic Aircraft went out of business. All were sold by the pound. Paul Quote "OPERTUNITY IS MISSED BY MOST PEOPLE BECAUSE IT IS DRESSED IN OVERALLS AND LOOKS LIKE WORK" Thomas Edison “Life’s journey is not to arrive at the grave safely, in a well preserved body, but rather to skid in sideways, totally worn out, shouting ‘Holy shit, what a ride!’” P.T.CHESHIRE Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.