WANT TO BUY Superliner extended Bumper brackets

[maxidyne237]

I am looking for the extended bumper brackets and filler panel for a Superliner II. This is for the standard bumper and Not the center tow pin. I beleive UPS MH;s used these as well. Let me know what you have. PM me if you have something. Thanks

[Mack Doctor Jr.]

Not sure if I understand what u are needing. I do have an 85 Superliner number that's like new with fog lights in it. It was ran on the road for 6 months and then the truck was sold and sat in a shed for 14 yrs and now it's just sitting here.

[41chevy]

jackb61sx has that style on his. Maybe he has the info on what you need. He just redid his 'liner. Paul

[jackb61sx]

jackb61sx has that style on his. Maybe he has the info on what you need. He just redid his 'liner. Paul

jackb61sxsuperlinerII.jpg

I know that truck I think. If you need pics let me know what you need, mine does have the filler piece back of the bumper its diamond plate aluminum to cover the bumper bracket.

[85superdog]

I have seen what your looking for. It uses the stock two tow pin bumper but it is extended out maybe 5 inches or so more than stock. It also has a filler panel across the top.

[greenmack]

I had to fabricate mine. I was unable to order it from my local dealer. I can take some photos if you'd like.

[jdfordhd]

Not a very clear pic, but I think this is what the OP is looking for.

[maxidyne237]

Not a very clear pic, but I think this is what the OP is looking for.image.jpg

Thanks for all the replies! JDFORDHD's trucks picture up above is the style I am looking for. I have a good bumper, just looking for the extension brackets and filler panel. Thanks for posting. Nice RW btw.

[mackdaddy]

The other style is for the 713 correct? There is some difference in the frame width?

[maxidyne237]

I cant say if the center tow pin style (like on Jackb61sx truck) was only on 713's but most I have seen were optioned with that style. I have seen the standard stamped bumper on 713's too so that wasnt exclusive to the 613;s.

[gearhead204]

will the bumper extenders from a rd work? I don't have any but remember some 89 rd688 having them

[jackb61sx]

I cant say if the center tow pin style (like on Jackb61sx truck) was only on 713's but most I have seen were optioned with that style. I have seen the standard stamped bumper on 713's too so that wasnt exclusive to the 613;s.

My truck is a 753 and most i have ever seen are the flat close to frame ones or the angled like the one on mine around here. Have not seen a bumper like the one pictured above it looks nice on that truck and also very nice looking Superliner!

[maxidyne237]

will the bumper extenders from a rd work? I don't have any but remember some 89 rd688 having them

Nope they are different. Thanks