MH fuel isolation outlet threads

[MHfred]

I am going to remove my passenger side fuel tank to repair and paint the straps. Does any one know the size and threads on the tank isolation outlet so I can plug the line?

[farmer52]

If you are talking about the "drain outlet" on the bottom of the tank, my tanks are 1/2"NPT.

[David]

If your talking about the cross over line, you can just shut off the valve on the other side and tape off the hose to keep it clean. Raise it above the top of the tank in case the valve leaks. Probably JIC if you wanted to get a plug for the hose.

[MHfred]

I am talking about the tank outlet to the crossover. I will pull the tank with the valve still on the tank and I want to plug the line when I remove it from the valve. It is tubing not hose.

[David]

If it's tube than it's probably 1/2" compression.

[farmer52]

My parts book shows 1/2" OD tubing.