Jump to content

Hello everyone, i wanted to show my R


Recommended Posts

Yes they are. The one i currently haul with is from 1980 and my dad bought for 3000 in year 2000 and had it rebuilt completly for around 20000, i bought the trailer 3 years ago, it still has the original floor and i put an 1/8 inch steel floor in it

Slow and Steady Wins the Race!

Link to comment
Share on other sites

I gotcha. I'm about to swap 3 loads of gravel to a farmer for a '79 model steel fruehauf that looks just like yours. Some of the curved ribs are rotted out at the bottom, but the floor is straight as can be. I don't think it ever hauled anything but beans and a load of gravel here and there.

Jake

Link to comment
Share on other sites

I gotcha. I'm about to swap 3 loads of gravel to a farmer for a '79 model steel fruehauf that looks just like yours. Some of the curved ribs are rotted out at the bottom, but the floor is straight as can be. I don't think it ever hauled anything but beans and a load of gravel here and there.

# loads of rock for a dump trailer? Damn I cant find one under 20 grand around here wtf?

"Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin

"If your gonna be STUPID, you gotta be TOUGH"

"You cant always get what you want, but if you try sometimes you get what you need"

Link to comment
Share on other sites

Heres mine with a 26' Rogers dump, I am curious how much does yours weigh?

"Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin

"If your gonna be STUPID, you gotta be TOUGH"

"You cant always get what you want, but if you try sometimes you get what you need"

Link to comment
Share on other sites

Did you say it was an "R 300" ? I heard of an R 400, but never a 300. Does it have a smaller engine ?

Mike the truck pictured with the western hood was my old truck. Nothing wrong with it. Just decided to try another business and when i got back in, knew i wanted an R and not a CH. Not sure why i didnt want air ride but thats what i chose.

The older one had a smaller engine and blew black if i hammered it. I had it perfected to whenever i shifted i would ease into the throttle and then after 3 seconds floor it, and it would get no smoke. It was a 300 horse E6 4V. Redlined at 2300

Current one goes to 1800 and makes 31 psi

Slow and Steady Wins the Race!

Link to comment
Share on other sites

Sounds like you gave it just enough time to build boost to keep the excess fuel from being wasted(smoke), the E7 350 should treat you good I have run a few of em and never had any major issues. I do love an R model too, I have run several tri axle R's always wanted to try an R with a dump trailer but ended up with an RW and a CH, take care of it looks like a great work truck.

"Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin

"If your gonna be STUPID, you gotta be TOUGH"

"You cant always get what you want, but if you try sometimes you get what you need"

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...