Jump to content

KKERGALL

Bulldog
  • Posts

    258
  • Joined

  • Last visited

Everything posted by KKERGALL

  1. Will check this weekend, think a friend has one on shelf. Will advise. Rich
  2. Is there a gallon / axle requirement?? I.E. single axle or tandem?
  3. Some type of aux. fuel pump ?? Does not look like std part.
  4. " SX " indicates 58,000 lbs or above rear suspension.
  5. I would estimate at this time under twenty five? Will ask a friend of mine who runs the shop interesting question.
  6. Have a cover NOS .
  7. 54MT314BP88 most common cable speedo or tack
  8. P/N# 14MF46P1 Not sure if that updated to long number or not.
  9. That is what it was built with. Usually the "head" sheet on chassis record gives the S/N# of engine but the guy I spoke with said it was not there? The 11GB1716Y is engine assy number from record.
  10. 11GB1716Y E7 460 E-TECH
  11. First number is S/N# of engine.
  12. P/N# 19QE3101P5 is correct part number for your brake chamber. I have one ( 1 ) NOS not sure how many you need. Located in CT
  13. PM me w/contact info. Will send u list. Rich
  14. Less fuel pedal, door seal, cowl moulding, ( have small piece left ). Putting prices on list and will e-mail you when done. Rich
  15. Thought I had " F " model parts book but don't. P/N# 25RU47AP1 pretty sure the lock is same as R / U / DM.
  16. CT I will update list and get back to you. Rich
  17. Hello, I just found that second door seal and will get in mail to you. I had cleaned out my truck before it junked and forgot where I put stuff. Sorry Rich
  18. B/W# 229635 What is your VIN# and will get you correct number and or part.
  19. For those out of area there is a nice article in local paper about a Business owner that is on this site. Take a look. www.rep-am.com
  20. A trick my Polish unit man showed my when I worked @ Mack dealer, use a paint marker go over the stamping on carrier and wipe quickly w/rag and you can make out the numbers.
  21. what is the " 11KHA " stamped on flat machined surface on carrier? Rich
  22. Good u found one.
  23. P/N# 2795-120002138L P/N# 2795-120002137R P/N# 2795-170014005
  24. Flat machined surface looking at axle from front where axle bolts up to springs, assy. # stamped into boss " 1QHA" etc.
  25. Some different numbers for sure, one common is 4ME21698 but VIN# should get right one? Give that and will supply correct P/N. Rich
×
×
  • Create New...