Jump to content

mrgumby

Bulldog
 View Profile  See their activity

  • Posts

    359

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by mrgumby

  1. mrgumby
    I wish I could buy that. Extremely fair for the work you put into it one of a kind truck
  2. mrgumby
    When it happens again take the air line that goes from dryer to the tank and see it flows air at good pressure and rate if it does then check the check valve on the air tank. I’ve had air dryers crack internally from winter freezing do what you described before. Or just try bypassing the dryer with a makeshift hose and try that Go over all your lines to recheck plumbing. Could also so be a sticky govener Oops just saw you replaced gov. Scratch that
  3. mrgumby
    Swishy has it right. Not just trucks not just girls. But trucks and girls together 👍👍
  4. mrgumby
    What no girl drinking beer in this post?? What a rip off I want my money back
  5. mrgumby
    I know all about the tubeless and tube swaps have done many of them but the tires on my low bed aren’t just a normal 15 in they have very tall sidewalls every tire guy I’ve talked to 4 in all said the same thing The 36 inch height 15 inch tire doesn’t swap to a 17.5 tubeless height wise I need the 36 inch height or a little more so the low bed stays off the ground so it doesn’t belly out. Now they all run 22.5 low profiles for that height
  6. mrgumby
    But the tubeless 17.5 are 31” tall and the 15” tube tire are 36” tall that’s all I could find and in a lowboy those few inches make a diffence in the ground clearance That’s all I could find
  7. mrgumby
    I’m trying to do the same thing local tire guy says no interchange for tubeless cause the sidewalls are so tall. Was told need to change wheel hubs to go to tubeless I’ve been doing research and it looks like he is correct Tubeless tire are much lower profile and less weight ratings at that size
  8. mrgumby
    Nothing like a car equipped with air bags Great option
  9. mrgumby
    Also did both engines use the same harmonic balancer or did the new engine come with it own. I’ve seen some where you reuse your old balancer
  10. mrgumby
    There is also a CHN model
  11. mrgumby
  12. mrgumby
  13. mrgumby
    They do sell an untreated filter with no sca in it tell them that’s what you want I know Baldwin Donaldson and luber fiber sells them untreated don’t know if Mack does
  14. mrgumby
    What no U models guess you don’t like them lol sorry had to throw that in
  15. mrgumby
    You left out patience. If you want it right you need that too. Truck looks great Been following it since day one I’m always waiting for new pics and updates. Thanks for the ride.
  16. mrgumby
    Where can I buy a can of that elbow grease you use. That stuff works great 👍
  17. mrgumby
    Check the directional switch and brake light switch
  18. mrgumby
    Probably to make the corners more ridged and stiff so the won’t distort or pop over time and bumps
  19. mrgumby
    Them is trucks with some big fog lights
  20. mrgumby
    Ch is on the grill
  21. mrgumby
    Did you pull the stick and check oil level is it full. Hey ya never know
  22. mrgumby
    Looks like a toroid choke
  23. mrgumby
    Do you have the numbers off the original seals that you took off
  24. mrgumby
    Have the oil sampled maybe fuel adding to the oil Does the oil go up every day or just the once after you change it Hey maybe you have a cash cow oil well
  25. mrgumby
    I have big fat hands and fingers I’ve had to pull the clutch fork and shafts out of the housing for extra space most the new ones you just loop over the top of the shaft or where ever the ears line up and pop the button in to locks it

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...