Freightrain

A cup, you simply "tighten the lid" a bit occassionally to pump more grease into part? I think that would be fine, plus it would look original. I'm not sure a zerk would be much better?

Actually Ric that's an old tale that needs to be rectified and forgotten. Yes, you can miss a gear but you DON'T need to stop and start over again. Period. Back in the beginning when I bought the truck I had my problems learning what/how. You can not shift UP until the truck is moving fast enough for the gears to mesh(not like a car when you can do it anytime). I USED to get hung up going from 4hi to 5lo, only because I was not going fast enough to mesh the gears. I need to be going at least 35 mph to make it happen, any slower and I can't get the compound back into LO. The gear speed won't let it happen, so I let the truck slow down a tad, pull the main out and put back into 4th and then play with RPM til compound drops back into gear again. Simple . Then just speed up enough for the shift and try again. As you see I don't have that problem anymore. It's all in learning speed/rpm of the specific truck you're driving. I only drive the truck once a week(at most), so it's taken some time to get real comfortable with it. I can drive it blindfolded now and it doesn't even phase me. Now, downshifting is still not quite as pretty since I don't get enough practice of that.

Twin stick driving Ok, here's my little clip of two handed driving.

Look on the right frame rail behind the spring perch for the actual serial number of the truck. That will give you a heads up on what it was. The door tag could have been switched over the years(like mine was). Send it off to Mack and they give you the complete build sheet and history behind your truck. Yup, a small donation helps keep the service alive.

Mine lay flat fine and start ok. They are a bit slow, even on "fast" mode. I think all the oil from the old compressor has got them gunk'd up pretty bad. I cleaned out my shutter cylinder, I think maybe I need to pull the wipers down and clean it out too? Maybe this winter since it's inside now? I thought about making an electric unit(I think I could fab something from donor parts). The motor part is pretty simple since it's hanging out there in the open.

Very clean looking R! Nice job. Love to hear that Jimmy talk.

Yup, that's what I did Rick! (less the 16" shcs stickin out the back LOL )

I finally got my little clip put to my laptop last night. Now if I can only "edit" out the bad parts..>LOL!! Still a rookie at the editing part of the program.

Rick, sounds like my set up exactly. Nothing cut or modified. Simply slip alt onto mount, slip on spacer to take up space and bolt it on. My alt. came with double pulley, so I used stock belts. Worked slick'r than snot LOL!! The only thing I had to "make work" was the adjuster arm. I think I had to weld an extension on it to make it reach far enough. It's been 4 yrs since I did this....so it's a bit hazy in memory! Ain't looked under the hood enough to recall either(good thing! ). I can get a picture if you still like one?

I put a 100 amp alternator on my 673. I used the original mount bracket and made a pipe spacer to locate the alt. in perfect position for the belt. Lots of miles on it with never an issue. I guess it depends on the alternator that you use? I'm not sure what mine is? I can get a picture and post it to show how mine is.

Not factory looking totally, but I've seen terminal strips with screws before. Hardware store should have them. Various length/number screws. I might have some original ones in a box, might poke around and see if I find any?

Great job! (just another envious, rusty truck owner hoping to someday do what you are)

I think I have a few pieces left. Have to poke around, but seems I moved some just the other day when I was working in the basement?

Holy SHNIKEY'S Santa Claus..................like Doug said....they think we're nuts. That was pretty cool!

Looks great!! Some day....some way....I'll get to do one like that! Perfect in every detail.

Now that's COOL!!! Could you imagine the ol B trying those doubles..>LOL!!!!!!

"This is a nice old truck - almost no rust at all, in fact, it still has original green paint on the floorboards." What climate controlled museum did you dig this out from...LOL!!! Sounds like a really great find. I'm hoping you get some pictures up soon.

SWEET!!!!!!!!!!!!!! Man, I think they hit that right on Barry. That is one sharp looking truck, no questions. I like the squared nose and "straighter/flatter" hood line. Those anteater's just don't have any class to them. Now, if they only came with two sticks....LOL!!!!!

These old trucks always fall into the "what are you willing to pay for it" routine. Is it a good deal to you? Personally, without looking at it, I don't think it's a bad price. How's the tires? body/rust?, brakes? etc? How much do you plan on using it, and how roadworthy is it? This topic gets discussed alot, and I think most will agree with what I have said so far. Welcome to BMT and Good luck with the truck.

I would think it would have to do with weight rating? I can't say for sure what my B is 5 or 6?

Are they 50/50 Tee's? Not going to shrink too much? Heavy or lightweight? Just so everyone knows. Just might have to give you a jingle Barry.

Ya, it will always seem to get you there. Just alot slower than other modes of transportation. I've pulled Fancy Gap with my '00 PSD dually(with trailer) and ran 55 mph without pushing it. I don't think the ol B would do as well, as you have seen!

When I was about 10 my dad drove me/sister to IL rail museum. The Zepher was sitting out front. Too long ago to remember any details. I've poked around the speeder sites. Looks like alot of fun, especially for a railfan. Like before...just what I need, another hobby!! LOL!

Got a big turbo hooked to that 673? LOL!! Mine don't do bad for 45 yrs old. How heavy is your trailer/speeder combo? My race trailer is 14K. You don't get left behind...except when the hills too long! I don't think I would want to try the WV turnpike or Fancy gap!

Simply STUNNING color combo! The speeder on the back is cool too!