Jump to content

880joe

Bulldog
 View Profile  See their activity

  • Posts

    500

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by 880joe

  1. 880joe
    I would check with a local machine shop on rebuilding your heads my local machine shop done mine for half of what mack wanted. Also a PAI inflame kit would save you some money
  2. 880joe
    What are they asking for it
  3. 880joe
    I believe I only gave around 350 for some from K&S Diesel Schofield WI
  4. 880joe
    My fuel line goes to a valve in center of the frame then draws from both tanks and returns fuel to both tanks
  5. 880joe
    I know a guy that converted a 66 R model to hub pilot. If nobody on here has better answer I can get ahold of him and see where he got his parts at for you
  6. 880joe
    Will the fuel splitter valve on a 99 ch keep the fuel equal in both tanks if the tanks are not the same size or will the smaller tank run out of fuel first
  7. 880joe
    Does the new switches have lights in them and are they a direct plug in or did you have to change the wire ends
  8. 880joe
    No
  9. 880joe
    Buy you some bigger injectors from K&S Diesel out of Schofield WI they have 50 75 and 100hp upgrades run you about 90 dollars each
  10. 880joe
    I was told the N in CXN and CHN ment that it had the new frame shared with volvo
  11. 880joe
    If I get time today I will look it over better and make sure it isn't rusty and post some pictures also I'm located in MO so it may be to far away to justify the shipping
  12. 880joe
    I have an 89 DM I'm going to part out I don't believe it has any rust issues I would take 1250 for the cab
  13. 880joe
    I would take 4 bulldogs
  14. 880joe
    I believe that is just a drain port to drain the water out of the block
  15. 880joe
    A 2050 2060 2070 and 2080 all have .60 overdrive
  16. 880joe
    A 2090 will have a .71 overdrive and your 2070 has a .60 overdrive therefore top speed will be slower
  17. 880joe
    It was my understanding that the eup's put out plenty of fuel needed bigger injectors to get more fuel that you can only push x amount of fuel through stock injectors. Correct me if that's not right
  18. 880joe
    Are you running stock injectors or upgraded one's on the etech
  19. 880joe
    What is part number of the s400 Detroit turbo your running with the stage 2 injectors
  20. 880joe
    I'm doing a camshaft in an etec now Mack was cheaper on the Cam it was a little under a 1000 Pai was about 50 a piece cheaper on lifter
  21. 880joe
    It is the 2nd one back from the front of the motor I would think
  22. 880joe
    Isn't the t2070 a .60 overdrive like the 2050 2060 and 2080
  23. 880joe
    Could be the peanuts wore out and slipping
  24. 880joe
    There will also be another computer inside the cab
  25. 880joe
    Will probably have to change all the wiring in the dash if you go to an electronic engine

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...