Cruiseliner Transformation

[cruiseliner64]

1 hour ago, fjh said:

can you post a picture looking up into the clutch access hole need to verify which clutch you have! 

Yeah can do.I'll get a good picture tomorrow(though I had one but I dont) and I'll post it...I think its a 14in twin plate  but not sure of the make....

Paul

[mowerman]

colors look dynamite,,,babba thanks for the photos,,,bob

[Vladislav]

Yup, looks nice and attractive. And nothing of the look it had when came into the shop.

A question - what did you use to clean the lower side of the cab? I see bare aluminium the most (or light paint?) And my Cruiseliner is well covered with dry mud all over the under side of the cab.

[cruiseliner64]

Yeah she looks a whole lot different now.Its plain we are doing a replica of Pig Pens truck from Convoy.The underside of the cab is bare aluminum.We soaked it in a 50/50 mix of vinegar and warm water then power hosed it off.Then we rubbed it down with 120 grit scotch cloths and WD 40.It came up nice and clean but still some areas to finnish.The red patchs you can see are steel and will be painted aluminum..... 

Paul