RowdyRebel Posted June 16, 2014 Share Posted June 16, 2014 ...they don't want you to be able to remove the starter. 1983 or '84 Craftsman GT/18...B&S motor. Only way to get it out short of pulling the whole dadgum motor is to disassemble the entire backside of the motor. There has GOT to be an easier way... Quote When approaching a 4-way stop, the vehicle with the biggest tires has the right of way! Link to comment Share on other sites More sharing options...
hurstscrambler Posted June 16, 2014 Share Posted June 16, 2014 I have the exact same tractor, did the starter 10 years ago. I Dont think I pulled the motor, but it was awful. Andy Quote Link to comment Share on other sites More sharing options...
1958 F.W.D. Posted June 16, 2014 Share Posted June 16, 2014 I used to work in a small engine shop when I was 16. Craftsman products were the WORST, and Craftsman products paired with Tecumseh engines were absolute downright nightmares. Quote TWO STROKES ARE FOR GARDEN TOOLS Link to comment Share on other sites More sharing options...
leversole Posted June 16, 2014 Share Posted June 16, 2014 Hey Yardo...would you rather have a tecumseh or a DD? Quote Link to comment Share on other sites More sharing options...
41chevy Posted June 16, 2014 Share Posted June 16, 2014 Hey Yardo...would you rather have a tecumseh or a DD?Ya know he is a DD / FWD man Quote "OPERTUNITY IS MISSED BY MOST PEOPLE BECAUSE IT IS DRESSED IN OVERALLS AND LOOKS LIKE WORK" Thomas Edison “Life’s journey is not to arrive at the grave safely, in a well preserved body, but rather to skid in sideways, totally worn out, shouting ‘Holy shit, what a ride!’” P.T.CHESHIRE Link to comment Share on other sites More sharing options...
j hancock Posted June 17, 2014 Share Posted June 17, 2014 Don't know why they screwed that up so badly on the 18. The 14.5 B.S. on my White/MTD was super easy to change. Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
1958 F.W.D. Posted June 17, 2014 Share Posted June 17, 2014 Hey Yardo...would you rather have a tecumseh or a DD?Whichever one blows a rod through the block first- then I can replace it with a Mack or Cat, or a Briggs & Stratton, depending on the application!!!!!! 1 Quote TWO STROKES ARE FOR GARDEN TOOLS Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.