Jump to content

Anyone know who belongs to this truck?


Recommended Posts

Speaking of bumpers.......beware of 32 Chrome in Wisconsin. I received one of the most awful made bumpers,,,, in fact unbelievable. Called to sort it out and the owner called me a liar and he would not take it back. I even offered to pay the shipping back so that he could see for himself since he claimed the pictures we sent were not accurate.

Link to comment
Share on other sites

Looking at my Berube's catalog, Valley Chrome Plating might be able to help with a new bumper for the

Superliner. Berube's is a dealer for their product out of Bow, NH.

They have either a Texas box end or rolled end bumper with various light patterns available including the 9 oval light as in the picture above.

http://www.valleychrome.com/index.php?n=1&id=1

Jim

It doesn't cost anything to pay attention.

Link to comment
Share on other sites

Speaking of bumpers.......beware of 32 Chrome in Wisconsin. I received one of the most awful made bumpers,,,, in fact unbelievable. Called to sort it out and the owner called me a liar and he would not take it back. I even offered to pay the shipping back so that he could see for himself since he claimed the pictures we sent were not accurate.

Hey mackdaddy, You should announce this problem on the Feedback Forum. It will make a difference to other persons reading that section encase they miss this thread.This will be of help to others.

Thanking You!

mike

Link to comment
Share on other sites

Valley Chrome does a decent job, if you look at the pics of my Black Granite it had a 20" Valley Chrome boxed end bumper. The bumper in the pic appears to be a std 18" Texas square with the tow pin holes and light holes. You can order a bumper however you want it won't be a stock item, you'll have to pick the pattern for your truck, then what style (Texas square, boxed end square, tapered,etc) then add options like tow pin,step or light holes. I ordered the one on my RW from Long Road Bumper Sales in AL, ordered it as an 18" boxed end square, RW 2 bolt pattern, added two bolt holes for the plate hanger and a step hole that is hidden by the plate hanger. I like the guys there but they don't get things right much and mine came in as a 20", looks good though so whatever.

"Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin

"If your gonna be STUPID, you gotta be TOUGH"

"You cant always get what you want, but if you try sometimes you get what you need"

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...