Jump to content

mowerman

BMT VIP
 View Profile  See their activity

  • Posts

    21,129

  • Joined

  • Last visited

  • Days Won

    159

 Content Type 

Everything posted by mowerman

  1. mowerman
    I didn’t think you were anywhere near finishing that engine
  2. mowerman
    Well sleeping on it did work out with the box bolts alignment atleast all the greasy oily part is over with also hats off on the END Joey
  3. mowerman
    lol I’m so overly burnt out on this job I don’t even wanna go look at it I’m indoors sucking up cold air and watching tales of wells fargo
  4. mowerman
    Well right now punch is in around 10 o’clock and pitman arm punch is around 12 o’clock
  5. mowerman
    well i was a little behind on that post,,,,,,excellent
  6. mowerman
    i think the highway patrol still uses the road flares ,,,around here,in emergency situations,,,unless im going crazy,,,but now we need to see your 2 year old photo,,,,i have a 8mm film of my pop lifting me into a brockway,,1958,,,i was also 2,,but i dont have a projector to run it,,bob
  7. mowerman
    ya but thier far from aligned
  8. mowerman
    after installation the dots are way off,,,,lol
  9. mowerman
    ok thanks for that,,,,,this box has definitely been apart before,,,,
  10. mowerman
    wow,,,,i dont think ive ever seen them,,,,,but those pots remind me of something we used to use in my area back in the day for road construction you would light them in stick in the problem area,,,they were full of kerosene,,,,that was way before environmentalist were calling all the shots.lol.bob
  11. mowerman
    picked up the new lines,a little while ago,holy cow,,,everytime i do business ,with this place the prices get higher,,,but he did put new ends on the pressure side,,,im not doing anything today rest day
  12. mowerman
    Oh, OK. Well, I can put the wheel on anyway I want there is no notch in the spline
  13. mowerman
    No, that’s not it. I already looked at those a long time ago, but thanks for that.
  14. mowerman
    I don’t think the last time this box was apart. They had it timed properly because it used to turn sharper one way and I don’t remember which way it was now.
  15. mowerman
    Take it apart again no that’s not gonna happen. If something goes slow with this box I’m just going to order a rebuilt. That thing was way too much work.
  16. mowerman
    My spline allows you to put the wheel wherever you want. I’ll put it together and drive it around a little bit and find Straight Centerpoint and yes, I have drivin trucks with an off steering wheel. that will drive you nuts.
  17. mowerman
    I don’t know what happened. I checked the timing three times and the timing mark is way off. I’m going to have to put it in a different position right now. I can’t get it to go on at all. I don’t know what happened. I’ll have to get something too file the spline Slightly. I’m going to run out in a little while and take the lines down. Glad this thing is almost finished.
  18. mowerman

    Best of Trump

    mowerman replied to JoeH's topic in Odds and Ends

    i havent been to one in 45 years,,,they had one in my home town,,,as far as nascar,,,i quit watching them when UPS and fedex both went to jap cars,,,and i drank bud wiser beer for years,,,till they sold the company,,,,,i switched to pabst i dont know what they did to thier beer,,,,but it didnt taste right after the sale ,lol.bob
  19. mowerman
    thats all i got,,,they were ordered for a 68 U model...not sure about fit,,,,left side pieces,,,bob
  20. mowerman
  21. mowerman
    woohoo its back in,,,,started to remove the oil lines so i can run them down in the morning....and have new ones made....i released a hold down bracket,underneath with made the oil lines come flying down ,,,and i got oil all over my clothes so that was it ,,came in for the day...bob
  22. mowerman
  23. mowerman
    that ingenious paul thanks,,,ok here goes nothing
  24. mowerman
    and yes working alone sometimes does not help at all and paul your right about big rig parts everything is so heavy,,,,i put that air starter in when i was only 39,,,but gotta better one pulled transmission and transfer case out of my 70 chevy pickup when i was around 20 myself with just a floor jack,,,,that was quite the trick
  25. mowerman

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...