Jump to content

Joey Mack

BMT Benefactor
 View Profile  See their activity

  • Posts

    10,005

  • Joined

  • Last visited

  • Days Won

    225

 Content Type 

Everything posted by Joey Mack

  1. Joey Mack
    Your'e right mark.... I forgot that.... 🤫.... Jojo
  2. Joey Mack
    I have a 1948 KB-7... I will be learning about a truck that is new to me.. I cant wait to get started on it... I'm proud to have it.. Jojo
  3. Joey Mack
    I hope this helps........
  4. Joey Mack
    Mack did away with the o-ring... On the liner there is the tall ring(step) around the liner, measure the low groove just outside the circumference of the tall step.. you will use a small amt. of Mack Gray sealant on the shelf in the counter bore to seal in the coolant. the head gasket will take care of the top... jojo
  5. Joey Mack
    It's all good..... You go DOG!...Jojo
  6. Joey Mack
    When I was driving late 70's R models, I learned to count, One One thousand,,,Two... I would double clutch,,, Then On "Two" I would grab the next gear.. It still works for me today... I rarely get to drive a 107 or 2070 anymore.. In youre case a 105.... same-same... Jojo
  7. Joey Mack
    I really wish I was there to see it, and hear it fire up!!!! Jojo
  8. Joey Mack
    it's all good... i was guessing what you had, when you said 5 spd. i said 105.. The Mack triple countershaft tranny's, were the same in the main box... the added back box changes it up,, with a few exceptions... Jojo. Hope I cleared it up sir..
  9. Joey Mack
    the 105 is very basic, and bullet proof... triple countershaft.. just be patient shifting it... it's no Eaton.. Jojo
  10. Joey Mack
    Mabey you can find one of these... The Mack 107 tranny book is around too... Good luck, Great find.. jojo
  11. Joey Mack
    I can tell you this, if it's an internal E.G.R. engine that runs good and you know the maintainance was good, It's a desireable truck... JUst my 2 cents... Jojo
  12. Joey Mack
    what about the axle do you want to know thats not stamped in the carrier housing, (Mack Rear).. or on the data plate on the axle tube, (Eaton rears)? Jojo
  13. Joey Mack
    me too... I no longer work at the mack dealer.. I left mid-june 2018.... I printed a boat load of svc info at home and put it in 3 ring binders... Luckily with my Mobile Mechanic business, I am able to avoid MP's and M-Drives... For now.... I hope the pics I sent help Tim... Jojo
  14. Joey Mack
    I know the quality of the pics is poor... I remember being fortunate to find the "legends" still in the truck.. I photocopied them and put them in one of my binders, for later use... it was faster than trying to use "Impact"..LOL! Jojo
  15. Joey Mack
    is the tranny an M-Drive? fuse #71 is for the tranny..
  16. Joey Mack
    well somehow, I split the EPDM and the top fuse panel pics... Sorry.. Jojo
  17. Joey Mack
    secondary throttle,, pull it out and twist to lock,, for whatever you need the engine to run up higher.... P.T.O. for example.. Jojo
  18. Joey Mack
    I am looking to buy a rear brake drum, the dia. is 15+ inches, hard to read it through the rust....the width of the shoes is 4 1/2".. the drum is 5 5/8" wide on the braking surface. I would also like to find an old parts book, and svc manual... Thanks, Jojo
  19. Joey Mack
    It is a very Cool piece,, I would love one in my Mack curio cabinet... Jojo
  20. Joey Mack
    Well folk's, I'm going to end my time in this thread.... Jojo
  21. Joey Mack
    Damn "L"... More great points! I'm getting an education, Thanks Jojo
  22. Joey Mack
    I just read this thread..... You got some damn good help here, John... yes Mack Gray is the best sealant... Good luck, Jojo
  23. Joey Mack
    ok Thomas L, You make good points, I still will study more of what you say,, I see our "Lib" Democrats, not as unifiying, and for the "working man" Sorry ladies... anyway, when you plant a seed, and nurture it, It Will Grow!!!!! Lib's and Progressive's planted seed's.... They will try to MATURE those seed's into...... Full Govt. control....... Jojo
  24. Joey Mack
    bullet proof!.... Parts are still available..... I built one 6 months ago... Do you know how to inspect the engine inside and out? If you are in North Carolina, I will build it for you.... Jojo
  25. Joey Mack
    Hello, Thomas L.... I just read your post...... I will read it a few more times, because I welcome what you say... and Grayhair... i was raised by "you and your kind"... Thats's what I miss!.. I'm a vet, however, I am not a Combat Vet.... I was raised by Vets, going back to WW-2, Korea, And Vietnam..... I will be damned if I rest on my Laurels, and disrespect, My fore fathers.... and our Country..... Jojo

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...