Joey Mack

Paul.... I wish that a few of my customers, werent so concerned about lookin good.. I have charged more money for labor for LED's and Chrome than I should have.. I tell them... Let me fix it to D.O.T. compliance.. (Our Law dog's) here in the state's.. I have one guy that paid me $1500.00 to put light's, stack's ,and Chrome on his W900L.. But it needed that money put towards the F'd up lighting harness's and a fan clutch, and gaskets, and so on... Am I on the same page with you sir? jojo

I just laugh... All these pro abortion folks at the capitol with signs saying "My Body My Choice" Where were those sign's when we were forced into the Kung Flu Bull Sh!t ??? We should have had choices that should have been easy, but no... we were forced into submission, and many people lost almost everything because of it... It's obviouse to me that 'killing' people is easy for a progressive lib... Lord help us... jojo

our country hit the floor in January 2020... and we can't get up.... Joe Biden's clan is the reason.... I'm not well educated, Just smart.... jojo

Boost leak??

well, so far, I have been able to raise my hourly rate, $15.00... I just priced a 30# cylinder of, R-134a today.... My acct. at NAPA... $340.00.... it doubled.. jojo

So my guess is that there is no water dripping from the drain tray, on to the ground?? You say the evap. core is clean and the filter is good? What is the history on repairs to the A/C sys.? Do you need a new expansion valve? is the Dryer saturated? it should have a sight glass on it to check condition... Now.... If this is a R1234y, lgbtq+ sytem,,, I may have wasted our time... jojo

Hello Len. I was wondering what the maximum amount of shim's is allowable, after cutting the counterbore in an E-Tech? I havent found any info on this.. joojo

Well Our king just sent 90 Howitzers, and 80,000 rounds,, or was it 18,000? i just forgot.. To Ukraine.. I guess he is trying to arm the world with our weapons. I bet he sends some to N. Korea, and Iran next. I think China has plenty.. Afghanistan, got a bunch from us... oh well.. This is an insane time in our countries life. jojo

?

So true J.J.N............ jojo

I agree, but havent figured a reasonable price. I told 2 of my customers that I was going up to $80/hr.. one said, (yesterday) yeah for your new customers, the one today told me "You can go ahead and pick up your tools now" . I finished my work and left, at $65/hr.. but I had a helper to pay today.. I guess I need to make them sweat.. no-one does house calls to do what I do around here.. the cust. I saw today is having me re-build the hendrickson haulmaxx suspension, and all wheel bearings and such, repair 2 lift axles, and set up the air brake system in the rear. he is converting a Pete 357 from a mixer to a Quad dump truck.. they did hang the lift axles, but need me to do the rest of it, before, sand blasting and then the body company installs the body.. I may do the wet system, but if I cant get paid good, i'm out.. jojo

I get it, in a very small way.. some of what I do may take a month or 2, and the E-6 I have is at 2 years because of priorities, and prices go up so high, so fast, that my shorter, long jobs, are bid out, and I didnt know that my shop supply cost's were going to go up about 65% on the average, and when shop costs are estimated around $125-$150, per engine, Solvents, Sealants, Paint, nuts and bolts, gasket paper, shop costs like electricity, welding rods, oxy/acet. cash paid labor, and so on.. and then the price goes up a bunch during the job.. now i have to call my customer and ask for forgiveness.. That sucks!! I hope I can stay in business full time, but... Hell our local harbor Freight is starting at $14.80/hr.. thats about $10/ hr. less than i'm taking in (after costs)right now. without the hassels.. If I could work there, and continue building engines in my shop, I may actually keep more money... sorry guys, I'm a bit stressed... it's tough at times, being one guy trying to keep trucks rolling.. jojo

The Mack trunnion repair works.. one of my customers has one, but he didnt know it. He bought it that way.. He's had it 3 years. I serviced it today, and it is in good shape. 2009 GU-713 Quad 'X' dump truck. 310M tranny, Mack rears... solid truck.. jojo

Nope... .04 c more today here in Salisbury, N.C... $5.29/gal. I did some book work in the office today.. I aint makin SH!T !!!.. I am only keeping the water out of the boat... So I guess I should be greatful... Sure wish I was an "Illegal".. I'd be fine and laughing at all the Gringo's... Like they do here in central N.C. .. jojo

ok... I'm not going to re-read all the posts... Allison tranny?? did you see my chart that I posted? Sensor input voltage is to be 5v.. on line VECU J-2 pin 11... pin 12 is the ground line... when the driveshaft turns it creates pulses and voltage that is sent to the VECU.. Did you replace the sensor yet?? is FMI-2 present in the code?? if it is, there is another test for a 6-8 code... I will try to help, but wont write the whole book,,, jojo

I'm curious??? All this Dick waving by Biden, and Pelosi and a few others, plus sending equiptment and money to Ukraine to Fight Russia...... Will this get us into a war with Russia and their Ally Nations? jojo

they add that.. they split 'Boss' to remove the trunnion bar. then weld clamp plates on to secure the new bar... jojo

Amen to Jim Jones..

Hans, there is only one in the kick panel... the other is ABS.. your right..

I really get a KICK outa you Aussie guys... I love it !! jojo

Man I wish I had been in one recently.. to refresh my memory. I know there is a group of ground wires left of the fuse panel behind the panel that says CL 700.. Have you checked it?

I know.... Truly sad !!! got back from my 2 road calls. One cust. was a no-show. the other job took 45 minutes.. $60 bucks.. My costs out the door today $83.00... Just one of those losing days I rekon... well back to my shop, jojo

Great !! I hope to see a post saying you fixed it and how? Good Luck T.... jojo

$5.25 today, just pumped it..

👍... $150/hr here too.. I know I'm cheap, but in my area, I'm competitive, a bit low though.. I would rather be in my shop building Mack E-Techs. I just cranked a John Deere 3179DF yesterday. I re-built it from a bare block. I also have an E-Tch and an E-6 2Valve in my shop. Almost done with the E-Tech. 1/2 way through the E-6. That one is for a restoration that is taking a fews years to get done. I'm about to un cover it and go at it.. Ok, gotta go.. 2 road calls today.. jojo