Jump to content

Joey Mack

BMT Benefactor
  • Posts

    10,236
  • Joined

  • Last visited

  • Days Won

    229

Everything posted by Joey Mack

  1. FJH is right,, what is the issue that you have, where is the drip? pics??
  2. Thats what I'm talkin; bout.. Glad you found it out.. Jojo
  3. well as long as you are here at BMT,, many guys will help, and are wayyyy smarter than me.. We LOVE pictures !!
  4. can get an AMEN ? !!!!! I'm in Salisbury, If I can Help, let me know.. I'm No ''B'' model expert, but may be able to help. Jojo welcome aboard... runs and drives is great..
  5. I like those rain caps..
  6. The Wife and I got to take a ride on The Tri-Glide.. We went to the Brad Wilkes truck show.. It was a great day over all. We got to meet Double Clutching Weasel,, 61H67,, and Brocky.. and the grandkid's.. and Mrs. DCW.. Very Cool.. My wife and I are on the far right..
  7. I know the head gaskets are, (20 Bolt heads) I bet the others are too..
  8. I have an ENDT 673 in my shop.. These are the gasket kit numbers to do a head job and full rebuild. I hope they are the same ones you need.. ''PAI'' is your friend on this one.. Jojo
  9. Has the head been removed? If he's a good E-6 2 Valve guy, then maybe you should listen to him.. When you can, post pictures of the head and any thing related to your question.. Welcome to the Dog Pound.... Jojo
  10. Yeah, it was rusted bad, but had Oysters growing on it, so I left it alone.. Doing my part for the Environment..
  11. My condolences, TJC... 😁
  12. Bob, I had to read your responses about 6 times. I think I get where you are coming from... I almost thought you implied that WE Deserve it... Yes, less talk is a good idea.. I would love Action from the people in Power that can fix this B.S.
  13. $3.59 ish, and holding here.. give or take a dime.. Diesel,, $4.29 ish..
  14. Holy Crap !!! You Kick A$$ !!
  15. So you have a boost gauge? Right side boost leaks can easily be the C.A.C. top right corner.. if you don't have a pressure tester, have someone rev through engine way up while you spray Windex at the front of the top right corner.. keep in touch.
  16. We should be there by 10:30. Leaving Salisbury at 9.. on the Trike.. just gonna ease on down the road..
  17. I look forward to an update. I am quite sure the bleed back issue is fixed... you could put a piece of tape on the globe at the fuel level, and go drink a beer or few, then come back to see if it dropped.. Just sayin'.....
  18. I told you ... those check valves are cheap, and important.. good job Bud.. Jojo
  19. Perfect, did you loose fuel prime? if so, you can crack #2 and #4 or #5 line at the head and pump the primer til they bleed then lock'em down... it will fire up with-in 10 seconds..
  20. good deal.. just make sure the globe and its flange is clean, and the filter housing too. the o-ring goes on the end of the globe, not under the ring... the ring is just a big plastic nut. You got this...
  21. Great, thanks for posting the fix.
  22. Check the fusable link in the battery box. See if it is loose or burned out.
  23. Ok.. I just saw the video, the large o-ring at the base of the globe is leaking air.. that is the problem.. drain it down to just below the globe. Clean and inspect the o-ring. Clean the lock ring and globe flange. Re - install and only pour enough fuel to show 1 inch of fuel, and re - test. That air leak is common, but can be avoided by keeping it clean. There is also a check valve inside the big input fitting. They are about $10.00, and well worth replacing.. it is easy to do.. Jojo
×
×
  • Create New...