Jump to content

Joey Mack

BMT Benefactor
 View Profile  See their activity

  • Posts

    10,093

  • Joined

  • Last visited

  • Days Won

    228

 Content Type 

Everything posted by Joey Mack

  1. Joey Mack
    it was a perfect hit, I wonder if there is a current that steered the ship ? seems to me that their headway would have been pointing to the center of the channel? sorry guys, but I have watched many films now and heard several news people and J.B. and there is too much chatter about the affect's on our economy.. Please forgive me if I sound like I need a new tin foil hat.. Jojo
  2. Joey Mack
    I am sick in my stomach just thinking about what could have happened if it was 12 hours later..
  3. Joey Mack
    I am stunned by the fact that the whole bridge fell, and one end broke off at he same time or a split second before the center section on that side tipped.. it is the side to the right in the videos...
  4. Joey Mack
    JoeH,, he has the updated sender,, it is sealed plastic, and not made the same way as the one in your MR.
  5. Joey Mack
    I'm not sure if this is the same topic I responded to in another thread, but grounding to the tank may not work.. the tank is insulated by the rubber at the mounts and under the straps..
  6. Joey Mack
    Just curious.... Aren't large ships escorted by tug boats to help keep the boat on course?
  7. Joey Mack
    It's terrible..
  8. Joey Mack
    Pete 379..
  9. Joey Mack
    a few years ago, I did $3,000.00 + work on a KW 900L.. Chicken lights, a bumper, stacks, shields, lollipop lights, and interior light strips, oh yeah and chrome switches.. but the truck needed a taller 5th wheel, a few tires, gear oil change, exhaust elbows, and rear light bar mud flaps.. My point is, that it was more important to look good, than to be DOT compliant, I also had to fix the shifter and knob on the 3 foot tall shifter. and was asked to figure out why the truck would jump out of gear at times.. I told him the tall shifter was the issue, but he said that a guy told him it's not the issue.. Ok... whatever...
  10. Joey Mack
    great work all around..
  11. Joey Mack
    well at least you got the damn exh stack set right,, I mean,,, really........ 🤣
  12. Joey Mack
    I would think that if the trailer button is installed, then the system is there.. My guess, is that he needs help with basic's. I would like it if he raised the body and took pictures of the air plumbing, and also of the rear plate.. Like you said Mech, there may be capped lines..
  13. Joey Mack
    The wire that is attached to the tank is to be hooked to the original return wire. The tank is not a good ground due to the rubber strap insulators. The end with the butt connector goes to the original power wire..or signal 'in'.. touch the new wires to the old wires and look at the gauge. If it pegs to full, swap them.
  14. Joey Mack
    Well,, I am trying to remember the oldest automatic truck that I've seen.. old firetruck I guess... I'm thinking about buying a new camera.. but I is Po..
  15. Joey Mack
    No corrections needed..
  16. Joey Mack
    Me too, Joe..
  17. Joey Mack
    Not impressed..
  18. Joey Mack
    It pisses me off that Donald Trump has had to pay many millions of dollars in court fee's and other junk, and is not even convicted of a crime, and 2 big players in this B.S. would cry 'Racism' in a heartbeat if the tables were turned.. In other news,,, my health insurance is going up by 3-4 %, not a big jump for me, but a jump non-the-less... I wonder if the illegals and the welfare peoples health ins. went up too?? Gotta laugh, or else I will go nuts... Jojo
  19. Joey Mack
    Is the throttle arm pulling all the way open when you push the throttle.
  20. Joey Mack
    FJH, did say something that I have had to fix before.. I had to go behind the first guy, because he didn't use any rubber bands to hold the little plungers up inside the rockers and got a few of them side loaded. I had to replace the rockers because there was a groove inside the bore from the crooked plunger..
  21. Joey Mack
    whoever gets to drive this one, had better be greatful.. The work that you guys are doing is really nice, and you didn't give up on the wrecked older truck.. Awesome... Jojo
  22. Joey Mack
    Me Too... Snowdog
  23. Joey Mack
    Yes #2, I don't have specs.. the EUP may not be the issue.
  24. Joey Mack
    Ok.. check the wires for the EUP's they are known to rub against the engine block and short out. Be very careful with the 5mm screws. They do NOT come out. Just loosen them and slide the terminal back and up and out. I recommend taking all 6 sets loose and stretch the harness out.. it seems like it's an 8-2 code. The second number represents the EUP #
  25. Joey Mack
    What year and body is the truck

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...