Jump to content

staxx

Pedigreed Bulldog
  • Posts

    1,089
  • Joined

  • Last visited

  • Days Won

    7

Everything posted by staxx

  1. I run a clear fuel line from fuel return overflow valve at head to the return at fuel filter housing . Look for excessive air in fuel; return this would indicate a cup is leaking combustion into fuel rail/return. Also look for debris at ecu cooling plate inlet and outlet fittings. Inspect overflow checkvalve for damage also , Good luck.
  2. Couple messed up race trucks .
  3. Thanks , if you update the bendix software to the newer version it works with the obd II . We were having problems also hooking up to the newer obd II on are natural gas trucks until the update .
  4. Hard to say , if the problem is not there anymore the system will moniter the issue for a coulpe drive cycles and clear itself I, if not it will derate.
  5. Have seen this a lot lately the def seems to be freezing in the lines and at dose valve causing issues.
  6. Is the malfunction lite coming on ? The engine postion sensor will cause low power..Check the basics lke Challenger says also check your turbo for damage . Have seen a lot of stuff cause low power over the years keep it simple first could be as easy as a failed muffler.
  7. I would put my money on a failed egr cooler.
  8. Cacade dishwashing detergent ,use the liquid form or pre mix some with hot water then add to your cooling system and flush 2-3 times and should be ok .
  9. Here's my dodge dart racing at Atco NewJersey back in the day 440-4speed car
  10. Are you sure you want to go there ?
  11. Found the bent wedge trailer on salvage direct site awhile back the mack was for sale.
  12. How do you bend up a wedge trailer....put a Mack dump truck on it.
  13. That is a 2001 natural gas Etec brand new sitting at Windrock .
  14. May need a real wreaker to clean up this mess.
  15. Wicked B in wicked slow race.
  16. Looks like something out of the Dakar rally race .
  17. At the point of no return the engine went silent
×
×
  • Create New...