Mackman87 Posted Monday at 03:04 AM Share Posted Monday at 03:04 AM Fellas, I’m curious if anyone has a picture of their rear mount PTO set up? I have acquired one for my six speed and have everything working but my original PTO was on passenger side and my main air tank is on the driver side. The rear mount PTO looks like it has to have pump on drivers side as well unless I am missing something. Any ideas or pics on the right way to setup PTO drive shaft to remote pump would be awesome. Quote Link to comment https://www.bigmacktrucks.com/topic/75565-rear-mount-pto/ Share on other sites More sharing options...
mrsmackpaul Posted Monday at 07:07 AM Share Posted Monday at 07:07 AM I would think some Googling about or searching on this forum should yield some photos Paul 1 Quote Link to comment https://www.bigmacktrucks.com/topic/75565-rear-mount-pto/#findComment-576367 Share on other sites More sharing options...
mechohaulic Posted Monday at 11:20 PM Share Posted Monday at 11:20 PM the rear mount P T O on a 6 speed runs off the lower counter shaft which is basically in center bottom. driveshaft runs straight back. side mount pto's run off higher side mount; which on the 6 speed had to have main stick in a gear suitable for pto operation while aux in neutral. purpose of rear mount enabled truck to creep slowly while dump was able to feed a spreader box sufficiently. how the pump itself is set up depends on how good some one is with a welder to fabricate a suitable mount bracket. 1 1 Quote Link to comment https://www.bigmacktrucks.com/topic/75565-rear-mount-pto/#findComment-576390 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.