Jump to content

MACKS

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    1,617

  • Joined

  • Last visited

 Content Type 

Everything posted by MACKS

  1. MACKS
    How did the rear suspension job turn out,nice n tight now?
  2. MACKS
    No beads,found one more tire,still need three more,probably on ship out at sea..lol
  3. MACKS
    Sounds to me like they screwed up,several weeks to install a clutch?
  4. MACKS
    Welcome,where in Va are u,Delmarva?
  5. MACKS
    The fact is we’re pulling oil out of our reserve’s to ease the price here but still shipping millions of barrels to China,right now our reserves are getting dangerously low and how will we replace it,or is that part of this misguided administrations plan..
  6. MACKS
    Use to use the white on the engine mount charge air cooler,wow that stuff was awesome..
  7. MACKS
    Pick up. Tube of Goop at Blows,cheap stuff that works amazing,you’ll find tons of use for it..
  8. MACKS
    Sounds like a job for the bike tube on the fuel tank fill spout,air it up an look for leaks..
  9. MACKS
    So a few weeks ago I bought the four Double Coin with the intention of buy four more now,well forget that can’t find em anywhere,wtf,I’ll give it a couple of weeks and if they don’t show up some place I’ll have to mix them with a different brand tire,unreal..
  10. MACKS
    I would start with a new fuel pump,not that expensive or at least they weren’t and then go from there..
  11. MACKS
    My 96 E-7 350 tops out at 27 to 28 on a hill if I give it full fuel if that’s any help..
  12. MACKS
    TMI..lol
  13. MACKS
    Yup usually when hard starting after they sit overnight = a fuel line leak or return line leak..
  14. MACKS

    Shop Talk

    MACKS replied to Onyx610's topic in Odds and Ends

    Don’t forget Senators and Congressmen and all there buddy’s with investments in this chit..
  15. MACKS
    The way I’ve done this with a fat bicycle tube is just cut a two foot length of tube with the valve in,clamp one end tight and clamp the other end over the tank fill,air it up..
  16. MACKS
    The info and video I posted is for drum brakes,don’t know anything about disk brakes so I’m out,good luck..
  17. MACKS

    Shop Talk

    MACKS replied to Onyx610's topic in Odds and Ends

    Well that sucks..
  18. MACKS
  19. MACKS
    Looking at your picture I’ve never seen them cut that short,ther is a correct way to set them up,that doesn’t look right to me..
  20. MACKS
    Why cage them,I just cut them?
  21. MACKS
    Swap them all out and be done with it..
  22. MACKS
    He needs a triple counter shaft transmission like a 5 or 6 or 12 speed,not sure what other trans has triple countershaft..
  23. MACKS
    That engine has all the power in the lower rpm range all the way down to 1200,that’s when they really pull,1200 to 1400..
  24. MACKS
    No I bought it from the original owner in New Jersey,I forget what the ratio is maybe 5.07 I have the build sheet here somewhere,great truck,u can feel the bumps but the cab is super quiet and she runs out smooth as silk..
  25. MACKS
    20 front 20 drop axle and 58 rears,e-7 350/12 speed,short wheel base with a 15 foot aluminum city cobra dump body,she’s a tough somabitch ,I have a 79000 down state permit on it..

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...