e9500v8
-
Posts
232 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by e9500v8
-
The reason for making is stock manifolds are notorious for leaks. I had dale rework my manifolds an they still leak. I have had enough.
-
PM me I have what you need!
-
I can make 45 psi at 1600 rpm. This turbo makes good boost at low rpm !! Sent from my iPhone using Tapatalk
-
Can you make the t313lr an 18 speed ? Sent from my iPhone using Tapatalk
-
WANT TO BUY OR TRADE Looking for a Mack 13 speed
e9500v8 replied to dogg rescue's topic in Parts Wanted
Had any luck I'm looking for one too !! Let me know if you find 2 !! Sent from my iPhone using Tapatalk -
Depends what ratio pto is for what gear you should run in. You need to get numbers off your pto and see what ratio it is. Then figure out how fast you need to turn the pump. To find what gear and what RPM. Sent from my iPhone using Tapatalk
-
Letting her eat !! Sent from my iPhone using Tapatalk
-
Sent from my iPhone using Tapatalk
-
I built this to test each head you can turn each head on and off. I had one head not working under load. This really helped me find which one it was. Sent from my iPhone using Tapatalk
-
Sent from my iPhone using Tapatalk
-
That spade terminal is dynatard switch puffer is on the front top of pump
-
Is the Mack T310MLR any good? I'm not up on all the new stuff. But I have a 12 speed now and thinking of going with the 310. It is the only trans I can find that will give me close to the same ratios for low gears an I like my low gears. For I do a lot of off roading (log truck). Thanks in advance for your input !!
-
The white is made by Dow Corning I have the number in the shop
-
I want Bosch I have a set of ambac I would get rid of. I been buying complete rebuilt Bosch with my hot tip for $450 a set
-
My Mack dealer gets them from buyers they make the fancy ones with the red button. Call Jeff at R&R Mack 330-794-9304 he will fix you up !! Tell him you want a buyers throttle cable !!
-
E9 V8 Mack Enginge Block & Crank on Ebay
e9500v8 replied to bulldog man's topic in Engine and Transmission
That is a marine engine. Just FYI -
Mmmmm good looking truck !! I want but wallet says no maybe someday!!
-
-
What is part number for regulater on 12 speed ?
-
Mine is doing the same thing ! I think the inner bore of the shifter is wore out !
-
I put that 13 speed in. Was a rebuilt unit.
-
She's not getting a boat ride !
-
-
That's so the cats can fit when you eat them up !!
-
If you crank that much out of a 711 you will score the cylinder walls. I wouldn't do it. If you want neat go E7 400 that would be cool !
BMT Forum Logo
