other dog

I was just doing some research on the computer- what?..no, really. Anyhow, I decided to take a look at BMT, but it wouldn't let me sign in for some reason. So, I to tried to change my name from other dog to "guest", but I couldn't sign in as a guest either. So I tried my phone, and here I am. Still don't know what's going on with the computer.

Welp, the leftover chicken looks like this now- it's good too!

I had a welder shock me one time, almost 50 years ago. Not a small shock, a "knocked me down and gave me a nose bleed shock". I was working in a garage and a guy brought a lawn mower in to be fixed. The frame was cracked around all the bolt holes where the motor bolted to it. I had some little small rods (stick welder in those days of course) and I welded up all the cracks, ground the area around the holes flat, then laid flat washers over the holes and was welding them in place. I put a new rod in and as soon as I touched the electrode holder with the rod it knocked me flat on my ass. Don't know why, it hadn't done it before, never did it again. I got up off the floor, found my glasses, and it did cause my nose to bleed, but that was the only injury.

So, aren't you going to tell us what the smart ass uncalled for comment was?

The two white breastesess- can you say that?..that might be racist and offensive to some people, because everything seems to offend somebody- anyhow, the two lighter colored- can you say colored?..never mind, I'm getting sidetracked here. They were marinated in a garlic and herb marinade, the wings, drum sticks, and thighs were marinated in teriyaki marinade, and the leg quarters and breast and wing pieces were just coated with the usual top secret rub. I already ate one of the teriyaki thighs and a wing, just to make sure it was fit for human consumption. It was delicious.

Well, I guess we'll be having chicken for dinner every day for a while. I bought a whole chicken that I wanted to spatchcock just to try it, because I'd never cooked one like that before. And Zina had taken some chicken out of the freezer to make room for something else, so I said "no big deal- I'll just cook all of it". The last chicken I cooked was so good I had chicken for dinner three days in a row. So y'all come on over and get some chicken, we've got plenty. I never did try that spatchcock thing, I cut it in half first, then I separated the leg quarters from the breastesess and wings. I just hope I can duplicate the results from the last time.

There's a place in VA. that might be worth looking into. I don't know a thing about them, but a lifetime guarantee is a lifetime guarantee.

Absolutely, I've hauled girders way shorter than that 150 footer that were way more challenging to deliver. Many jobs in West Virginia were tighter spots to get in to. On that load going down to 840 in Tn. the only time we even had to use the dolly was coming out of the plant in Abingdon and after we got to the job. All the rest was Interstate.

Yes, everybody knows that. That's why trailers had sliding tandems. But depending on the load you had, how long it was, and where it was going sometimes was more important than getting axle weights right. Axle weight was actually the least of our worries.

Here's one I brought out of Banker Steel in Lynchburg . I think this beam went to Ashland, Va. when they were building 295.

First truck I drove for H.H. Moore.

that's the truth!

One of the dollies H.H. had. This was the one I pulled the most. Made from a Mack truck chassis. You had to pull the front axle up onto blocks and chain it to the beam when it wasn't being driven. Dragged out of the junk yard with a Farmall M and slapped together some kind of way. Under that 150' beam that was just dropped on there in a haphazard manner by two Farmall H tractors. One had a front end loader, the other one had just a hay spike. I said "are you sure i'm not over on the drives?" They said "don't worry 'bout tha' mule, jest git on down yonder wit it''.

That's kind of like gear shift knobs- they used to have a whole shelf of them at every truck stop, now they bring top dollar on e-bay.

I remember going across Hawk's Nest on rt. 60 in West Virginia, when we would always stop at the Catholic church in Boomer and set our brakes up. They had a big paved parking lot and I would pull in there and get my 9/16 wrench and the piece of cardboard I carried out and adjust the brakes. Lock them down and back off a quarter of a turn. You might not adjust them anywhere else, and if you did you might back them off half a turn. But I'd stop there every time I ran Hawk's Nest and it was a quarter of a turn. 🤣 Been across there many times in an F model Mack with a 50,000 lb. load of coils on. You needed to have your $#it together, nobody around here even knew what a Jake Brake was then.

The hardest ones to load were the ones with a "sweep" on them, or curved beams. You had to position the dolly way up under them to get them to set up, then you had all the overhang to deal with. But like they say, if it was easy everybody would be doing it.

So, instead of having oversize permits to do what you had to do you'd be better off with a 70' overhang?..interesting concept. You had to load long girders so they would "set up" on the dollies, meaning they would stay there and balance, without turning over before you ever put a chain on them. This was actually all carefully thought out and done, nothing was hap-hazard about it.

Yes, even though it was 2 different companies I drove for the same family for more than 42 years. I started driving in January of '79 and went to work for H.H.Moore in June of 1979.

We hauled a lot of bridge girders. I took one from Carolina Steel in Abingdon, Va. to rt. 840 around Nashville one time that was 149'11". I usually just say it was 150' 🤣 That one was on a 4 axle dolly with a lift axle. It was made from a Mack truck chassis. I'll post a picture when I get home, don't have it on my phone.

I worked there from 1979 until 2005. H.H. and his wife Evelyn had both passed away by then and his son and daughter were running the place, neither of whom had really had anything to do with trucking until then. They later sold the company to PGT Trucking. I went to work for F.L.Moore and Sons in 2005. F.L. was H.H's son, the sons were his grandsons. That's where I retired from, and theyre still going strong. I was there when they added the two extra bays to the shop, but I don't remember what year it was. The far end of the last bay had a nice wash bay in it. That little building behind the shop in the old picture was the tire shed at one time, and there was a huge old willow tree by it. Half of the willow tree fell down and I went up there and sawed it up. I kept the wood for firewood, but it wasn't very good wood, it was almost like cork when it dried, didn't burn good at all. Here's H.H. and Evelyn Moore in probably '83 or '84. The K100s were '84 models, he bought 6 brand new ones at one time. F.L. Moore bought the the brown one and had it leased to H.H.

A power mirror on the passenger side makes it much easier to blind side. The Peterbilt I used to drive had a big window in the sleeper too, so by the time I couldn't see the back of the trailer in the mirror anymore I could see it through the sleeper window. The KWs had a window, but they were too low to help with backing up.

This is a very interesting picture a friend and former co-worker posted this morning. He said he was cleaning and found it, and he asked me what year I thought it was. It shows the old H.H. Moore Jr. Trucking Co. headquarters in Appomattox, Va, and Lawson Ford is the place to the left of it. All I see at H.H. Moore's is chip vans, no flatbeds. There's a wood yard across rt. 460 from H.H's. We narrowed it down to the 70's, between 72 and 79, that was about as close as we could get. H.H. Moore Jr. trucking Co, the Ford dealership, and the wood yard no longer exist. Appomattox Hardware is now right across the road from the old Ford place, and the house on the corner between the Ford place and H.H's. was torn down years ago. Another thing I noticed that's strange in the picture is that there is no traffic on 460. Nothing. You'd never see that today. Here's the same area today- Street view of the old H.H. Moore Jr. Trucking Co. Inc.

I lost a set off a chip trailer over on rt. 60 when I was on the way back to the wood yard from Covington one night. Or maybe it was just the outside tire? I don't remember now, as it was over 40 years ago. But I knew right where I lost it. There was a big pull-off about a half mile up the road, so I dropped the trailer there and bob tailed back. They sent somebody over from the shop the next day to fix the trailer, or put a tire on it. I went back to that pull off and got the trailer, and walked back to where I'd lost the wheel(s). It was just woods there, and I walked back and forth several times and never saw a trace of anything. But somebody could have found a tire and wheel and got it, only superman could load a set of duals by himself. Or the incredible hulk, the hulk could do it. Or those tires might still be over there in the woods somewhere to this day.

I've pulled triples a few times. Two flatbed trailers stacked on a flatbed trailer 😁