Jump to content

mattb73lt

BMT VIP
  • Posts

    1,377
  • Joined

  • Last visited

  • Days Won

    144

Everything posted by mattb73lt

  1. First hub complete, almost got both rears done today. A few hours tomorrow should have the right side done. I like the original spoke wheels for their classic look, but I’m very happy with the look of the Budds and polished rims. With all the polished aluminum and stainless, they really tie everything together.
  2. I know this thread is ancient, but since it popped up again I went back through it. I've never seen the black B-75 in person, but I've saved some pics of it for my reference on my build. If it does sit on a Peterbilt frame, I think the way it was widened was to extend the headlight panels, cat walks and rear fender extensions. The reason I say this is there's a lot more space between the headlight and the fender joint than other B-73/75's. It would also be a lot easier to rework those panels than to stretch the compound curves of the fenders, as they appear to be stock. Whatever is the case, it sure is a beautiful truck and is still my favorite model(s), too.
  3. Overall, it has a 246" wheelbase. Leaving 160"s for the CA. I'm mounting a 24' Jerr Dan equipment bed to it. It's actually already mounted, just need to be reassembled.
  4. Spent yesterday prepping the frame and today was the day. Great weather, almost no wind and a solid SIX hours of spraying and mixing paint. So many nooks and crannies to get at and a LOT of paint!! It’s done and ready for more assembly.
  5. The Alcoa rims I bought were used and at a decent price. The company I got the from had them polished on the exposed sides. They did a decent job, but they needed some more work and cleaning. I’ve been getting a bunch of stuff collected up to finish the frame and get it painted, just need some cooperative weather which looks like I’ll have some soon. I had to have the front brake shoe anchor pins fabricated as none could be located anywhere. Today I spent on the rims doing some clean up and then polishing and sealing them. They’re ready to mount as soon as the hubs are on. Looks like a few large jumps forward are looming, which will be great. The rims really came out nice.
  6. Well, that was expensive!!! But, it’s done and they’re ready to go in a few weeks when the frame is done.
  7. Nice work. That cab does go up pretty high!! I would be nervous, too!!
  8. I did that for corrosion. A lot of the frame parts are aluminum and had to be repaired. I etch primed and then painted the mating surfaces to try and prevent that, along with greasing the bolt holes. I'll shoot the whole frame as a unit, now.
  9. Did some repair work to one of the donor cross members and been adding more parts back to the frame. With some help, I aligned the axles to within 1/16”. The rear axle was out by over a 1/2” when we started. I’ll have the whole thing aligned at a local shop when it’s back on the road. I’m figuring a few days of work then I can paint the whole thing. Weather is improving and I’ll have to do this part out side. Trying to aim for late September/early October for stacking it back together, then I’ll get the front end done. Edging closer!
  10. Plugging away, a little bit every day, some more than others. Doing some frame work tomorrow and hopefully some more red paint in the next two weeks.
  11. …and now the back hubs are done. All kinds of new parts and a lot of wrench work.
  12. They’re the early heavy style domed ones I sent out a while back for chroming. The later style are flat with a lip all the way around and a bit thinner.
  13. A little bit of bling for yesterday's efforts. Now all assembled, bearings packed, new seals, new wheel studs and nuts, new drums and ready to go on!!
  14. Red, red and more red. Still fixin’ and paintin’, but making progress!!!
  15. M551 Sheridan tank on the low bed. Heading to a museum?
  16. Still plugging away. Work has been busy and parts have been slow in coming, but getting stuff done. Hub and drum time, all the parts are cleaned and now primed. I still have to press in the new rear wheel studs and then paint the parts prior to assembly. I need to freshen up the primer on the frame, but it's not far off from turning red. Well into my fourth gallon of primer, which is really eight when you reduce it. That's a a lot of primer!! I'm thinking I may be stacking the main components together in late September/early October. Also need a driveshaft built, connect everything up.... The time is coming where I'll be trying to start it and then moving it under it's own power for the first time ever.
  17. Great update and more progress!!
  18. I wish I had a smart phone back then. I would have documented a lot more of the truck. The photos seem a lot clearer than the old 35mm I used, plus no wait to get the photos back. Manipulating them, zooming in or sending them to someone is so easy. I photograph everything, especially disassembly. It's like a color notebook.
  19. Matched up this view from '98 to now. BIG improvement!!
  20. Did you ever look at those reproduction Guide Lights? They are or were available in chrome and painted versions. They were advertising in hot rodder magazines, I believe they still are. Just looked them up on eBay, new and used are there. Guide 682-C's, with the little clearance light on top.
  21. Look at the lower back wall of the cab exterior. They’re prone to rust there. Any seams, rain gutters, door sills, fender edges where the bolt together. Signs and quality of any bodywork. Floor pans, especially the driver’s foot area. Frame for any signs of separation. From the eBay pics it looked pretty good. If all that stuff has been done do it, then it comes to what you’re willing to pay. Bring someone with you that’s at least a little knowledgeable on trucks. Try not to get in over your head or capabilities ( read money and skill level). Good Luck, Matt
  22. I have to agree with Mike, kind of a vague question. Give some specifics and pictures would be a big help for some honest advice. There’s always some key areas to lot at, but you need a reference point to start with.
  23. They’re just exit vents that allow the air out and not hooked up to anything. The doors drop down to open. They seal up OK, but not air tight. Going to add A/C at some point when it’s done. Probably a back wall unit.
×
×
  • Create New...