ejensen21 Posted December 11, 2016 Share Posted December 11, 2016 can i put a regular spin on fuel filter and tee the air bleeder line into the return line i can't find a new canister the engine is a 711end with bosh pump Quote Link to comment Share on other sites More sharing options...
j hancock Posted December 11, 2016 Share Posted December 11, 2016 Can get them through WIX filter. If you have the full flow/bypass Clarifier style filter with one little line and two BIG lines on the bottom, the filter is Wix 51233 and gasket 15114. It crosses to Baldwin filter #P706M and Mack #236GB311A. There is also a Luberfiner bypass style filter with 2 small lines which is a Wix 51750. 1 Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
ejensen21 Posted December 11, 2016 Author Share Posted December 11, 2016 im talking about the fuel filter housing it has a cracked at the bottom so i want to put a spin on fuel filter but my fuel filter housing has the third air bleeder line Quote Link to comment Share on other sites More sharing options...
theakerstwo Posted December 11, 2016 Share Posted December 11, 2016 Photo please Quote glenn akers Link to comment Share on other sites More sharing options...
j hancock Posted December 11, 2016 Share Posted December 11, 2016 3 hours ago, ejensen21 said: im talking about the fuel filter housing it has a cracked at the bottom so i want to put a spin on fuel filter but my fuel filter housing has the third air bleeder line Sorry. Been messing with oil today so I had oil on the brain. I will look for some info. Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
Maddog13407 Posted December 12, 2016 Share Posted December 12, 2016 my 711 had been converted to spin on, cant remember where they ran the lines tho. have to take a pic Quote Link to comment Share on other sites More sharing options...
Freightrain Posted December 12, 2016 Share Posted December 12, 2016 I left my stock filter on the engine and just put a remote mount back by the tank with a spin on/separator filter to help. I suppose you could likely buy any remote mount and filter just like I did and put it anywhere you liked. Not sure if I would worry about the return line on the filter? Is that necessary, as there is a return line on the injection pump. Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.