svigarfarms Posted February 13, 2015 Share Posted February 13, 2015 Give us some ideas ch613 pulling to the right we had it aligned few years ago and truck doesn't really get that many miles a year. Quote Link to comment Share on other sites More sharing options...
mrsmackpaul Posted February 13, 2015 Share Posted February 13, 2015 a brake stuck on or dragging ??Paul Quote Link to comment Share on other sites More sharing options...
MACKS Posted February 13, 2015 Share Posted February 13, 2015 Loaded,empty or both,jack up the front end and greese the heck out of the king pins with no weight on them,then recheck your tie rod ends with a good load on the truck.good luck 1 Quote Link to comment Share on other sites More sharing options...
BOB DINGSDALE Posted February 13, 2015 Share Posted February 13, 2015 I had that problem and found someone had put caster shim in opposite than other side so that I had positive on one side and negative on other.Tires did not show signs of odd wear. Quote Link to comment Share on other sites More sharing options...
hatcity Posted February 13, 2015 Share Posted February 13, 2015 aligned a few years back? time to have it checked againtires both same size? and wear? air pressure equal?drive for a bit and feel brakes- is one hot, the other HOT!! Quote Success is only a stones throw away.................................................................for a Palestinian Link to comment Share on other sites More sharing options...
steth121660 Posted February 13, 2015 Share Posted February 13, 2015 conservative republican leanings??? (sorry had to do, it it's been a long week...) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.