Jump to content

Brian

Bulldog
  • Posts

    68
  • Joined

  • Last visited

Everything posted by Brian

  1. Otherdog do you now have another good ol dog at your house?
  2. Aw Man and I thought I had my work all caught up for the weekend, Now I have over due oil changes to do. That is what I get for running off at the keyboard, any way thanks for the heads up Block
  3. I use SAE 30 non detergent
  4. Check and make sure that you do not have mud or a rock between the pedal and floor to keep it from coming all the way back up
  5. I live between Crossville and Grayville just wondered if we are neighbors.
  6. Hey Reb where are you from in SoIl?
  7. I have a B-615 that I put a 865 in, I done a little fab work and mounted the spin on to the frame behind the cab. Block
  8. Rob I had a similar problem with the water pump on one of my endt 865's about 3 years ago the seal and pin were both available from Mack at that time. I built a small puller for the impeller and done the work myself, the only thing the seal is made out of ceramic and it is very easy to break and cause a leak ( The voice of experience here I changed the seal twice) hope this helps Block
  9. Just a reminder, I know it is short notice but the Wabash Valley Chapter of A.T.H.S. is having their annual show on Sat. May 10 at 9:00 a.m. on main street in New Harmony, In. If anyone is looking for a show to come to you are more than welcome.
  10. Rigchaser, I just wanted to let you know that I am still going to get your photos, I went out to the truck the other day to take the photos batteries were dead on camera bought some new ones did not look real close they are the kind you recharge, yea they were dead too, went back to store the next day bought charger need to get in camera and gete this done sorry for delay. Block. Also with a name like rigchaser and pic. on your font you move oilfield equipment? I do too these CLs are rigged up as winch trucks.
  11. Mackpro68 Where are you located in Western Ky? Block
  12. Doug where were you in Indiana? Block
  13. Rigchaser I can get you some frame pictures from the CL we have four of them where I work one 2000 model, one 2005 model, one 2006 model, and one 2007 model the 2000 has 460 Mack the other three have Cummins let me know what you need and I will try to get them to you. Block
  14. Mack on fire I have a good TRD-67 for sale no known problems I took it out of a B-61 to install a TR-720 I am located in southern In. where are you located let me know Block
  15. That truck is a B-61 with the big radiator, this was available on most if not all of the diesel B-Models, I have seen a B-67 with the big radiator from the factory. If you watch the show again you will notice the rear facing hood scoop this idea was borrowed from the early maxidyne series R-Models etc. as the air intake for the tip turbine engines, and if you look close during the shots of installing the new A/C system you will see a tip turbine engine upgrade, making need for the bigger radiator to cool this setup in a work truck. Block
  16. I do not know for sure because it is hard to see but I think this truck is a B-61 with the optional big radiator, or it could also be a B-615 with the wrong emblem and no V-8 emblem, If Superdog or the Ol Fuzzy Buzzard can shed some more light on this,if you look at the picture of the dash the firewall looks flat like a B-615 instesd of the protruding doghouse that the B-61s have. What does everyone think? Block.
  17. Hey all I just found some info on the trick my truck B-Model episode, it is going to air for the first time on Aug. 31 at 8:00 p.m. ET/Pt You can check out the before and after pics. at cmt.com trick my truck photo gallery it is listed as Mike Justices Sawtooth check it out. Block
  18. I will try to get some pictures posted this weekend
  19. I also have a New Way air tag axle for sale
  20. I have the following Mack parts for sale, 2 TRQ 7220 transmissions both have problems take 2 to make 1 maybe 1 TRD 67 good transmission 1 R-Model cab nearly comlpete airride factory air no doors no rust 2 R-Model hoods 1 for RB? goes with cab 1 R-600? both are nice hoods
  21. The information that I have lists the ratios on the double overdrive transmissions as follows the trt(l) 720 has overdrive ratios as follows 5 direct is 0.84 and 5 over is 0.69. The ratios on the trt(l) 7220 are 5 direct is 0.84 and 5 over is 0.70 hope this helps Block
  22. Packer how much are they paying experienced winch truck drivers without lumps in their pee? Block
  23. I could not agree more, I hope the boys at trash my truck know what an ICON that the B-Model MACK is to everyone who knows anything about trucks. Barry if you have any input in this project be sure and remember to get the serial number to Fuzzy Buzzard Block
  24. Chuck what kind of shape is the interior in? Would you be interested in selling any of it? And where are you located? Thanks Block
  25. Are any of your tan interior parts usable? If so would you be interested in selling any of them? Thanks Block
×
×
  • Create New...