Jump to content

The Rubber Duck 006

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    846

  • Joined

  • Last visited

  • Days Won

    4

 Content Type 

Everything posted by The Rubber Duck 006

  1. The Rubber Duck 006
    Yes But I miss quoted which of My Grandpa's trucks he used it on. I believe it was on one of his Mack's.
  2. The Rubber Duck 006
    Yal talking about i-84 makes me glad I don't run up to Dover Plains,NY in New York State anymore during the winter
  3. The Rubber Duck 006
    The Green Hornet which has the MP8 at 445hp under the hood and a 13spd gets 5-6mpg. She used to get like 2-3 if that but after changing the egr it went up.
  4. The Rubber Duck 006
    I'm doing well haven't had a chance to do anymore digging into The Green Hornets history. Had a great Christmas went down to my mother in laws again for Christmas 🎄.
  5. The Rubber Duck 006
    Good deal. I'm not sure on the diameter of an older Mack steering wheel but I think the one on the truck now is 20-22 inches I believe
  6. The Rubber Duck 006
    I've been pondering a Way to make the Inside of "THE GREEN HORNET " Look like an old school Mack. We tried the old school thirteen speed shifter knob but it won't hook up to the 4 air supply lines on the tranny. So I was thinking of maybe getting a old Mack Steering wheel and seeing if it would fit. Any thoughts or suggestions if an old Steering wheel would fit would be greatly appreciated. Now remember She's a 2016 Mack CHU613 PINNACLE for reference
  7. The Rubber Duck 006
    Thanks Bob. I try. I can't stand a dirty truck especially with all this chrome hahaha. And yet we have guys at this company that hardly wash their trucks and laugh at me for polishing the chrome and aluminum on mine
  8. The Rubber Duck 006
    It's an addiction for me always has been even before I was old enough to drive. I'll drive till they tell me I can't do it no more and will stay with my current company.
  9. The Rubber Duck 006
    Boss told me that no chains were allowed on these loads since they are painted rebar and then told me that they would have someone else pull them from now on and I said good let someone else deal with it.
  10. The Rubber Duck 006
    20231109_170529.mp4.3gpp
  11. The Rubber Duck 006
  12. The Rubber Duck 006
    Well it's been almost 6weeks since I've gotten THE GREEN HORNET back and been out on the road. So far no issues except improvements. Fuel mileage is now up in the 5-6mpg range and she has better pulling power. Unfortunately on Monday had a load shift on me in Richmond Virginia and had some rebar fall off the trailer. Thanks to a long wheelbase only one airline and the Tractor protection valve was busted. Then to make it interesting I was the victim of a hit and run hahahaha while I was stopped and surveying the load shift. But the week went great and now I've got her all dolled up with Polish.
  13. The Rubber Duck 006
    Alot of guys don't realize to is yeah you can legally haul 40,000lbs on a 10ft spread but you better not be over 20,000lbs on each axle.
  14. The Rubber Duck 006
    Yup as long as they paid their 48.00 Union dues You couldn't touch them. My Grandpa hated that about the Union when he worked at Fords Lima Engine Plant.
  15. The Rubber Duck 006
    I've always said " You can have all the horse power you want but if the horse to torque ratio is not equal it doesn't mean anything "
  16. The Rubber Duck 006
    I know the workers at The Ford Engine Plant aka Penske don't get paid as much as they did back in the day when my Grandpa work there. 😒 As far as the other junk goes The UAW supports and has Supported too many lazy good for nothing people just because they paid their union dues. Other Dog I agree with you I also Want nothing to do with Unions.
  17. The Rubber Duck 006
    Facebook Market place will only let you post with a Automatic Transmission selection hahaha. Then put the Transmission info down in the description.
  18. The Rubber Duck 006
    I heard through the Grapevine that Ford hasn't had a raise in 20yrs so that's what they are striking over. Also MACK wants a 26.00 per hrs on top of what they are gittin paid already.
  19. The Rubber Duck 006
    I drove a 1997 Mack CH613 Gold bulldog with the Elite interior for the owner operator. I think the Mack Motor had 400hp. Pulled 34,000lbs plus 12,000lbs at 70mph no problem
  20. The Rubber Duck 006
    The Motor that was in the Rubber Duck truck in CONVOY!!! Even though they dubbed it over with Detroit sounds lol
  21. The Rubber Duck 006
    Add some new quarter fender Flaps today after I parked her for the weekend. She's a totally different Animal now. More power and better fuel mileage. Some hills in Ohio she used to climb at 30-35mph and pushing 220 degrees she now pulls at 40-45mph and just barely over 200 degrees. She drives like a dream. Was a great week.
  22. The Rubber Duck 006
    And you gotta pay tolls lol
  23. The Rubber Duck 006
    Almost sounds like you've got warn out parts like the other guys commented and like you've got air in the system somewhere. Even the foot pedal for the extend a hoe is hooked to the hydraulic pump. Sounds like the old girl needs a rebuild to me. I own a Case 530 Diesel
  24. The Rubber Duck 006
    I knew that actually I was making a Halloween Joke hahahaha. But thanks for the info
  25. The Rubber Duck 006
    One of the best Automatic Transmissions I think is The Mack M-drive 12spd. Virtually indestructible and very reliable.

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...