Joey Mack
-
Posts
10,113 -
Joined
-
Last visited
-
Days Won
228
Everything posted by Joey Mack
-
I jut saw the truck again... Spoke wheels?? what country are you in? no biggie, just curious..
-
I forgot to ask about power steering performance in my last question..jojo
-
are you having issues with building good air pressure in the tanks and maintaining the pressure?
-
For Sure.... thanks Bob
-
I know I just said I was out.... I was wondering if the after treatment ECU is trying to read the 2 differential pressure systems? EGR/DPF? How do you 'lie' to them so they think they are doing a good job? jojo
-
ok... well to be honest, I know nothing about deletes other than they breed future problems.. with respect, I am backing out of this post... good luck sir, Jojo
-
you reckon.... programming is the issue? do you need a 'file' that supports the delete? I really don't know what the 'f' i'm asking here but it seem's to make sense.. jojo
-
that screen looks like Premium Tech Tool... there are calibration tasks in the program, I dont know about deletes, but do you still have a DEF system? or is this an '09 before DEF? to calibrate the VGT. you have to remove the accuator and run a calibration then install it to the turbo... (B.S.) there is also a gauge to check/set the 1/4 gear into position.. jojo
-
I drive an Isuzu NPR with a 16" box as my service truck. I love the maneuverability. However, I would love to have an MR with an E-7 or Early E-tech as my service truck.. It would be 'overbuilt' and that would suit me just fine..
-
we used to be ''mechanic's" but now we are parts changer's... all in the name of "quality control" I get it.. but I really think it's about "Income control"... it's funny how a 15 year Indonesian kid can build a component better than we can.. anyway, just a little rant on my part... jojo
-
there is a bunch of things that are sent out or just bought as a reman now.. jojo
-
Robert Bosch 8100... I beleive... I really wish that I worked in the pump room 20+ years ago, it is my only regret, during my Mack years... jojo
-
The RW I'm working on has an Ambach pump with the reversing relay and a Bimber valve.. I guess i'm robbing this thread for some knowledge, thanks again.. jojo
-
I was curious about the boost pressure that was posted.. I didnt think they made much more than 32 psi, but my knowledge is more about E-7 and E-Tech... Jojo
-
JoeH and Glenn... are you guys talking about the reversing relay screwed into the the intake manifold? I am working on a Superliner with an E-6 4valve, and I was wondering if I should replace the reversing relay.. I havent checked to see if I can get one yet... just curious, Jojo
-
ok... just because.... is the throttle lever loose or slipped out of adjustment? jojo
-
loosen 2-3 fuel lines at the head, and pump the hand primer until fuel comes out, wait for the air bubbles to stop. tighten the first line that bleeds, then pump again til another one bleeds, tighten it then go on to the next. (17mm or 19mm wrench) then fire it up !! jojo
-
Sweet looking spokes..
Joey Mack replied to MACKS's topic in Exterior, Cab, Accessories and Detailing
they need to be their own country.. -
pic's ? please ?
-
Mack cxu613 wont start!! Send help
Joey Mack replied to xxdeh inc's topic in Engine and Transmission
check fuse 71, in the EPDM.. its under the dash where the clutch pedal would be... -
sorry... dumb me....
-
yes i can , just not sure of the meaning. who knows what?
-
?
-
if this truck is an ASET CEGR, take the air line off of the turbo actuator, and see if good air pressure is present with the truck running and air built up.... if not... go to the VGT air filter and check the system for blockages... many times , the air filter doesnt get replaced, and this issue happens.. it is in front of the starter, probably black as dirt, so you will have to look good... jojo
-
Sweet looking spokes..
Joey Mack replied to MACKS's topic in Exterior, Cab, Accessories and Detailing
I'm currently working on an 86 RW... i will have to look,, the headlights look normal to me, but now, i'm curious...
BMT Forum Logo
