Jump to content

Joey Mack

BMT Benefactor
  • Posts

    7,817
  • Joined

  • Last visited

  • Days Won

    198

Everything posted by Joey Mack

  1. if its not a trash truck I suspect and RD 688S or a CV 713
  2. 5.9/ gallon around town.
  3. Has anyone tried to see of power goes to the celenoid while someone trys to start it?
  4. Hows the exhaust manifold and gaskets look? Any cracks under the turbo in the center section?
  5. Jacobs, ? Ok, somehow i dont recall Jacobs on an ASET. Well, can you check the valve adjustment to see if its in spec and look for a sticking rocker arm,?
  6. So it truly is silicone and not fuel worms? Thats really odd. Do you have a Davco filter as well
  7. I assume you have a powerleash engine brake. You may want to replace the orings for the celenoids.
  8. Can you cut the filter open and remove some if the element to see whats going in the filter?
  9. Cummins ISL 370HP. I dont know crap about today's Cummins
  10. Heck, i can fart louder then the engine brake..
  11. Yep, just wish it had an 8 LL. However, the Allison 6 spd. Moved it down the road pretty good. Its amazing how quiet this truck is..
  12. 10-4.. it drove very good, of course its only got 5,000 miles on it.
  13. Im in bed, trying to figure out how to post pictures with my new phone in sidetrack thread.
  14. https://photos.app.goo.gl/cySyTibVipGhqoq49
  15. God Bless You !!! I really hope this one gets back to work..
  16. I dont know what to tell you Bud,,, dont know why the truck is deleted, the G-Men made truck builders put big issues in the ECM's if they get deleted, so that you would get it in the A$$ when all you want to do is make a living.
  17. I may be jumping too far ahead, but I got a 2009 that was deleted, to start and run right by using a starter button. the 39 MT starter in your truck is pretty good, the little space ship celenoid that is bolted to it can fail, but I think you said yours is new. I am not very smart about deleted DPF/DEF trucks, so I wont be much help...
  18. well, deleted trucks cause lots of issues, do you have one of those hand held push buttons to clip to the starter? then turn the key on and see if it fires up.
  19. will it start with the key in the 'ON' position? is it wired up correctly, one of the wires has a red band on it..
  20. is this a cranks but wont start,,, or a ,, it does not turn over?
  21. ok,, i'm trying. i reposted them in 2 posts, did those work?
×
×
  • Create New...